Your cart is empty.
Your cart is empty.Product Description
TECHNICIAN SETUP
- Heating Swing (cycle rate or differential): is adjustable from 0.2°F to 2.0°F
- Cooling Swing (cycle rate or differential): is adjustable from 0.2°F to 2.0°F
- Temperature Calibration --- (is adjustable from -4°F to +4°F)
- Fahrenheit/Celsius Display --- (selectable °F or °C)
- 3 Minutes Compressor Delay --- (selectable on or off)
- Display Humidity --- (selectable on or off)
The display range of temperature.........32°F to 99°F(0°C to 50°C)
Setpoint Temperature Range...................44°F to 90°F(7°C to 32°C)
Display accuracy of temperature .............±1°F
The display range of humidity..................10%RH to 99%RH
Display accuracy of humidity ....................±5%RH(30%~80%RH), other ±8%RH
Operating ambient ......................................32°F to +105°F (0°C to +41°C)
Operating humidity ......................................90% (non-condensing)
Compatible with most conventional single or multistage systems
For use with Central Gas, Oil, or Electric Furnaces single or multistage systems, up to 2 Heat/ 2 Cool
1. Does not work with conventional multistage systems, heat pump systems, mini split systems and 12v rv thermostats.
2. Not compatible with 110-240V electric heat systems (like electric baseboard heat, line voltage, convectors, radiant-ceiling heat.
Features
- Large display and characters are easy to read
- Simple menu and big buttons for easy operation
- Fan switch with ON and AUTO functions
- Easy access battery compartment
- Low battery indication
- Easy wire coded terminal blocks
- Separate heating and cooling swing (cycle rate) adjustments
- Separate B & O terminals
- Terminal Designations: RH, RC, G, Y, Y2, C, O, B, W, W2
- Universal sub-base, mounts on wall or junction box
- Dimensions of thermostat: 4.92 x 3.74 x 0.98 in (W * H * D)
Terminal labeling reference
RH, (or R, R5, 5 ) ---------------- 24V Power (Heating)
RC -------------------------------- 24V Power (Cooling)
W, ( or W1, 4 ) ------------------- Heating Relay 1
W2 ------------------- Heating Relay 2
Y, ( or Y1 ) ----------------------- Cooling Relay 1
Y2 ----------------------- Cooling Relay 2
G --------------------------------- Fan Relay
O --- Reversing Valve (for heat pump applications energized in Cool mode)
B ---- Reversing Valve (for heat pumpapplications energized in Heat mode)
C --------------------------------- Common Wire
The C terminal does not have to be connected when the thermostat is powered by batteries.
Package Contents
1 x Digital Thermostat, 2 x Screws & Anchors, 1 x Installation Manual, 1 x Cable Label
James C. Hilton
Reviewed in the United States on March 14, 2025
This thermostat works great for me. I installed it about 2 months ago and it is still working great.
SayLaVee
Reviewed in the United States on February 8, 2025
Works great and so much easier to use than the programmable one we had. No we can't change the temp when not home, but we can easily go up or down a few clocks when we get up or go to bed or feel too warm or cold. Nice big numbers and buttons. It is nice to go back to all we really needed and a low cost price. Installing was easy too.
George
Reviewed in the United States on January 28, 2025
Stay away from this China made garbage! sending it back.The Bad...it does work properly. It runs the furnace for an hour. The house gets hot...too hot then it doesn't come back on until the house is cold. There are no settings to change this. Sorry I threw out the old thermostat.The Good...The holes to the wall lined up perfectly to the old themostat. The wire markings were the same so it was easy to wire.
Customer
Reviewed in the United States on December 20, 2024
To program this thermostat is not complicated, it has an off switch , heat, cool and is very easy to program
Life Elevated
Reviewed in the United States on January 19, 2024
I've had to replace 3 thermostats. This one is easy to intall,looks nice and works great!
amxcoder
Reviewed in the United States on August 5, 2023
This was an easy an install as could be expected replacing your old thermostat. After turning on my furnace and air conditioning I was chagrined to see that the room temperature displayed was seriously in error. That does not effect the ability to regulate the temperature in the room. Right now I am using it to good effect. However, it says the room temperatur is 76F when in fact two other thermomenters right next to it show exactly 73 degrees. So I have to mentally subtract 3 degrees from the display when setting what temperature I want. I would have thought that this would have been a no brainer to build since thermometers sold on Amazon are within 0.2 degrees of each other. I would like to just order another one and just plug it in, but I hesitate because I am guessing they are all inaccurate. I will wait a year and see if a new one gets more accurate.
RNsurgicalKY
Reviewed in the United States on December 1, 2023
I have put in several high dollar programmable thermostats over the years. All have had issues with connectivity and programming, turned into PIA...Decided to go back to simple T-stat design, so much better. This one was super easy to install and easy to use, just turn the temp up or down. The display window and adjustment buttons are large, making it easy to see what the temp is and adjust. Good quality and easy on the wallet price. I highly recommend.
Kelly
Reviewed in the United States on January 21, 2022
This should have a way to turn the light on without changing the temperature in the process but it does NOT.
Recommended Products
$156.23
$ 64 .99 $64.99