Your cart is empty.
Your cart is empty.
1, DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.
2, A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V.
3, A / B terminal blocks, Pitch 7.62mm/0.3", Wire range 26AWG ~ 10AWG / 4.0mm square, Rated voltage 300V, rated current 30Amp. Strip length 8mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
4, A1~A12 / B1~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated voltage 300V, rated current 20Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
5, High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm rail.
Capt. Jack
Reviewed in the United States on July 24, 2024
Masterfully designed, the power leads can come in from the side and the taps are separated on the top and the bottom. Screw terminals are strong and robust. It’s a decent size screwdriver slot as well, not too small. I continue to purchase this because it works perfectly and fits the bill!
beezhjack
Reviewed in the United States on June 18, 2024
Nice distribution module of voltage and tap off points. I continue to purchase because it's excellent and DIN rail compatible.
David C. Benham
Reviewed in the United States on June 17, 2021
Used to power multiple Raspberry MBs from a single power source... so serving as a power distribution block.
Pierre Chicoine
Reviewed in the United States on July 9, 2020
This has a common bus for positive and negative. If you have a lot of power connections, this is the way to go.
C. Cox
Reviewed in the United States on July 28, 2020
Perfect for Aiphone GT video intercom installation mounts on Drail with other components.
Adam T.
Reviewed in the United States on July 26, 2020
Works perfectly. I needed a distribution block for a bank of solenoids, having the split positive and negative rails allowed for simple wiring. Connections are durable and secure. Highly recommend.
Charged_UP
Reviewed in the United States on July 22, 2020
What I needed
Joshua L
Reviewed in the United States on December 30, 2020
This simplified power distribution on my DIN Rail; and has two power inputs for redundancy!I wired two Mean Well 12v DIN Rail power supplies in parallel and I can say that it does what it says it can do. I then have these going out to all of my 12v devices using 2.1x5.5 DC plugs (and adapters as necessary.)Im now redundantly powering my router and cable modem with ease. And with 2 UPS, one for each power supply, I never have to worry!
Recommended Products
$18.00
$ 8 .99 $8.99