Your cart is empty.
Your cart is empty.Product Description
The PanaVise 335 Magnet Base – attaches to the 201, 220, 300, 301, 305, 391, and 396. Attach a PanaVise to any flat, ferrous metal surface! Perfect for machinery, truck beds, toolboxes anywhere magnets are NOT a problem. Magnet is slightly recessed into Base Mount to avoid scratching metal surfaces. Magnetic power holds up to 5 lbs. (2.3kg) at 90 Degrees. Overall diameter: 4.32-Inch (2.28mm). Height: 0.5 (12.7mm), Weight: 1.0 lbs. (0.4kg).
From the Manufacturer
The PanaVise 335 magnet base mount is designed to utilize the power of its integrated magnet to provide dependable, but easily detatchable security for a variety of PanaVise work-holding tools in work settings dominated by metal surfaces such as machinery, truck beds, sheet metal and tool boxes. The base mount is composed of two pieces: a mount bolt circle with a triangular array of three pre-drilled and tapped holes, and a magnet located at its center. Compatible PanaVise work-holding tools -- including the 201 PV Jr. vise, 300 and 305 bases, and associated vise combinations -- attach the to mount bolt circle with 1/4" screws (sold separately). After bases or vise combinations are attached, the magnet holds the entire assembly to any flat, ferrous metal surface. The 335 magnet base mount securely supports up to 5 lb. at a 90-degree angle. Its magnet is also slightly recessed into the mount bolt circle to avoid scratching metal surfaces during application and/or removal.
Specifications
- Magnetic holding power: Up to 5 lb. (2.3 kg) at a 90-degree angle
- Overall diameter: 4-1/3" (2.28 mm)
- Height: 1/2" (12.7 mm)
- Weight: 1 lb. (0.4 kg)
- Compatibility (PanaVise models): 201 PV Jr. vise, 300 and 305 bases
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
Placeholder
Reviewed in the United States on September 13, 2021
Exactly what what I was looking for, a precision vise for delicate work. I used the low profile base and added the magnet since my work area is all metal, so I'm not limited on where I can place the work piece
E. L Suttles
Reviewed in the United States on February 2, 2021
I ordered this Panavise 335 magnetic base along with the PanaVise 350 Multi-Purpose Work Center...and realized they are incompatible. You can either use the tray base or the magnet base, but not both at the same time. Taking the 335 and using it as a template I drilled and countersunk three new holes turned 30 degrees from the others. This recessed the 335 further inside the 350's tray base and once the included adhesive rubber feet were applied the base came out almost perfectly flat. The base is now more stable, doesn't slide and yet can still be easily removed by hand. This worked out so well it made me wonder why Panavise doesn't include the holes in the casting of the 350 Work Center's base in the first place.
Max Green
Reviewed in Canada on April 16, 2020
...casting quality is a shame.
Jeremy Jones
Reviewed in the United States on February 2, 2019
Item was shipped very quickly and packaged very well. Easy installation and works great.
Darsh
Reviewed in the United States on December 31, 2019
While solidly built and perfectly machined to fit the 300 bases, it lacks a few things. First, it has a sprayed on finish. No powder coating, and it scratches easily. Second, the magnet could be stronger. It's plenty strong enough to stay in place on a flat surface, which I imagine is all it's intended for, but for anything atypical it's just not strong enough and will slide. Third, there's nothing protecting the work surface from the bottom of the base. There could be a rubber adhesive pad or something in place, but that falls on the user to implement some sort of protective layer. Other than this, I have no other complaints as the base works as intended.
silversurfer
Reviewed in the United States on September 16, 2017
Very strong magnet! I suggest putting a thin rubber or masking-tape gasket on it to prevent it from scratching painted surfaces it sticks to.I put one layer of green masking tape on the whole bottom of the magnet, and it no longer damages the powder-coat finish on my wonderful "QuadHands Deluxe" helping-hands product (buy one!).
Kathy D.
Reviewed in the United States on August 1, 2017
ok base could be just a tad larger
Pulpit Pounding Political Pundit
Reviewed in the United States on August 30, 2016
If you are putting your Pan-A-Vise on a steel countertop or bench, this magnet will work excellently.
Vinnie Silvagio
Reviewed in the United States on March 1, 2014
Nice strong magnet, and easy to mount/dismount from the base, while it's easy enough to remove from whatever surface it is sitting on. Does just what it's supposed to do.Also, although the description does not specify, it fits fine on the 301 Standard PanaVise.
Recommended Products
$36.00
$ 16 .99 $16.99