tonia
Reviewed in the United States on March 9, 2025
I ordered it what I thought was brushed nickel, it came chrome. After a more in depth search I wasn't able to find brushed nickel. I might just have to be ok with the chrome.
Peter Gunn
Reviewed in the United States on January 27, 2024
This sleeve was used as a replacement on my shower when the plumber damaged the original during maintenance.
Garrett Henderson
Reviewed in the United States on October 22, 2023
Price Pfister threaded collar for shower diverted valve, not available at home depot...perfectly fit
Bob Smith
Reviewed in the United States on September 12, 2022
Fit perfect! Looks good. The old one was all scratched up!
DD
Reviewed in the United States on August 15, 2021
We used this as a replacement piece. The original sleeve was put in backwards and was no longer usable once we did our repairs we didn’t need to replace the entire unit. Only the sleeve. This was just what we needed. New as described. Arrived on time.
Alex Sowers
Reviewed in the United States on January 9, 2020
It works fine.
JH
Reviewed in the United States on October 10, 2019
This Retainer sleeve works great in combination with the retro-fit kit and a new face plate kit.What worked for me -The Avante valve in my shower and bath had SHWR 7105 brass valve body in the wall. I needed a new cartridge - then a the retro-fit kit to replace the 27 year old plastic parts (that I broke). The retro-fit kit is not compatible with the old faceplate :(. So I ended up just refurbishing everything.Here is the parts list: All available on Amazon :)Pfister S742920 Avanti Cartridge $21Pfister 9319300 09 Series Trim Retrofit Kit $21Pfister 972-300A Retainer Sleeve, Polished Chrome $20Pfister 960-045A Round Wall Flange, Polished Chrome $36DANCO Waterproof Food Grade Silicone Grease $4All together, this is expensive (~$100), but surprisingly, these are all superior quality to the original parts from 1992 and when you finish, you essentially have a completely new setup.I hope this helps others with similar projects.
Customer
Reviewed in Canada on July 27, 2017
got it never needed it
Customer
Reviewed in the United States on March 2, 2017
I couldn't find this piece anywhere else. It arrived on time and fit exactly as expected. This little gem saved me a few hours of work and a couple hundred bucks that I would have had to spend on replacing the faucet set and repairing the wall on the other side of the shower. Amazon delivers another easy win.This item is a match for the Pfister Avante that has no screw holes in the face plate. This retainer, or ascussion, has threads that screw into the valve and hold the face plate in place. The trim kit sold at Lowes and Home Depot will not work if your fave plate has no screw holes. You can't fake it with glue either, the retainer that comes in that kit is a different diameter (smaller). Wait the two days and get this one. This retainer can be screwed in with the long side in or out, depending on your setup. I have one in the shower that goes short end in and one on a standalone tub that is short end out.