Your cart is empty.
Your cart is empty.Ideal Security's Premium Garage Door Rollers with 10 Ball Bearings have nylon shells for the quietest possible operation and steel cores for durability. They are the top-of-the-line in garage door rollers. These 2" wheels have an actual diameter of 1.812". They fit the 2" tracks on most residential doors. The 4" stem is actually 3.75" long and is suitable for standard single-hinge installations. The stem slides into the hinges on the outer edge of the door (for hinges, see our SK7101/SK7102/SK7103). The average residential garage door has 10 rollers on it for smooth and easy opening and closing. To extend the life of the electric door opener, change all rollers at the same time or when adding a new electric opener. Always work carefully and secure the door before starting your replacement. Ideal Security has been supplying quality hardware to door manufacturers for 65 years. Please explore our other door and window hardware products for your home.
NL
Reviewed in Canada on January 7, 2024
It works great than the metal ones.
Wilfred D'Souza
Reviewed in Canada on March 24, 2022
It was easy to install. There is marginal reduction in door noise, have gone through one winter and there are no issues so far.
Bruce
Reviewed in Canada on July 31, 2021
Looks like great quality. Easy to install and makes the door operate much quieter.
Tim R.
Reviewed in the United States on May 19, 2021
They were easy to install, garage door is a lot quieter we will see how long they hold up. Very happy with results
AmaGirl
Reviewed in Canada on December 9, 2021
Exact fit replacement of original steel rollers. They do help supress the racket that was happening with the original steel rollers. Most importantly I needed to make sure all the rails aligned properly which was not the case with the original install.
Muskokaken
Reviewed in Canada on July 27, 2020
Not quite as easy to install as some online videos would suggest, but bending rails and undoing a couple of key screws got the job done with some grunting & groaning. Only had to remove top roller brackets, the rest I could access without this. Note: do not attempt to remove lower roller brackets as these hold the side tension cables!!Runs much quieter than old metal rollers I replaced...probably won't last as long but my door is near end of life anyway.
Crawdaddy
Reviewed in the United States on January 1, 2019
Ordered these 6 months ago. The nylon coating is worn off and one has started to fail already.
GagDad
Reviewed in the United States on April 27, 2019
Was replacing 21 yr old garage door opener. Decided to replace rollers to help with noise, age of original rollers. The combo of the nylon covering rollers w/new bearings, & new belt type garage door opener really works ! Cannot hear this old door go up & down now !
Bradley
Reviewed in the United States on December 28, 2018
Arrived on time and installed in about an hour. Top 8 went on easily by removing all but one hinge bolt and swinging the hinge inward. Have a plan for the bottom two as they are a bit more difficult. I put the door up halfway and then wedged a board to keep the door from dropping. I was then able to remove the bottom mount and replace the roller. If you cannot do that, have a second person to lift the door so you can reattach the bottom mount properly.Door operates mich quieter than with the old worn down steel rollers. Very happy with the product!
M
Reviewed in the United States on April 20, 2017
I replaced my previous rollers with these and they are a night and day difference in the noise my garage door was making. The door is so quiet now. These have been on the door for several months now and are still working great. Very easy to change out.
RG Cox
Reviewed in the United States on December 25, 2016
I like the nylon rollers. They are quieter than metal rollers. These are good quality and they work great.
B TEAGUE
Reviewed in the United States on August 1, 2015
These are hefty. They appear to be Capable. I had been shopping by foot and they all looked like toys plus they came in 2pks. So when I turned to the internet and looked at these I hit the buy button. They came today and when I removed one of my 27 year old rollers I felt I had some that would be just as durable. The old rollers were metal and a few were nylon and those appeared to have been replaced and were smaller. The new ones are about same size as orginial. I pleased all the way around with my purchase.Installing them was quick. A tip, where the track joins usually around eye level take your hammers claw and use it to bend the edge of the lower tracks top 3 inches out slightly. Roll the bottom roller to that position and take a huge screwdriver and popout the roller and slide out and in with the new roller. Roll door down and pop/in the next roller, repeat and then change sides and bend track back like it was That leaves the top rollers to be replaced. Which I will need a ladder for and will do tomorrow.I am going to replace the rubber strip on the bottom and it will function like a new door. Great price, enough quality rollers to do my door. A must buy.
AB
Reviewed in the United States on December 27, 2015
Used these to replace the original rollers on 20 year old garage doors. If you want to restore your garage doors to smooth quiet operation these should get it done. Even the 15 year old garage door opener is working smoother and making less noise just by installing these rollers. Highly recommended.
Recommended Products
