Shopping Cart

Your cart is empty.

Your cart is empty.

Qiilu Turbo Boost Gauge, Car 2' 52mm Turbo Boost/Vacuum Pressure Gauge Meter Blue LED Light 12V 30 PSI Boost Gauge Meter

4.4 (6) Write Review
Free shipping on orders over $29.99

$16.05

$ 6 .99 $6.99

In Stock

About this item

  • [ Function ] --- Turbo boost pointer meter, used to monitor boost pressure & vacuum compression levels of car's turbo & supercharged engine. Avoiding turbo over boost causing other possible engine issues.
  • [ Clear Display ] --- White dial with blue LED light, clear red pointer+accurate scale and numbers, can clearly show the press / vac. Easy to read, the LED light allows views very well even in the darkness, convenient to use.
  • [ Measurement Range ] --- The turbo boost gauge reads vehicle's boost levels from 0 to 30 psi & vacuum compression levels from -30 to 0 inhg. High level of accuracy and sensitivity, easy to operate.
  • [ Wide Application ] --- Universal for most of cars or motors, simple to install, fit for most 12V vehicles. Length of PVC hose: 172cm / 68in, Diameter of Screen: 52mm/2.05in, Outside Diameter: 57mm/2.24in, Length: 47mm/1.85in.
  • [ Wiring Method ] --- ①Connect the black wire to the negative pole of the power supply and keep it connected.②Connect the yellow wire to the positive pole of the power supply and keep it connected.


Product Description

Turbo Boost Pressure Meter
Boost Bar Gauge

Installation Method

  1. Gauge May Be Mounted In 2"/52mm Dia holes Or In Auto Gauge Custom Mounted Panels .Secure Gauge With Mounting Clamps Supplied.
  2. Drill 3/8" Dia .Holes And Install Rubber Grommets Where Pressure Or Vacuum Line Passes Through Sheet Mental Such As Firewall.
  3. Attach Nylon Pressure Line To Fitting On Back Of Gauge Using Adaptor ,Ferrule ,And Compression nut .Route Line Through Grommets To Engine Compartment .Connect Line To Pressure port On Engine By Using 1/8" Adaptor Ferrule And Compression Nut For Turbo And Prossure Gauge Or 1/8" Adaptor And Fitting For Vacuum Gauge.
  4. Start Engine And Thoroughly Check Installation For Leaks. Twist In Light Socket Assembly And Connect One Wire(Yellow) To Dash Lighting Circut Or Other 12V Power Source And The Other Wire(Black) To A Good Ground.
Vacuum Pressure Meter

Specification

Item Type: Turbo Boost Pointer Meter

Material: Plastic

Unit: in.Hg / PSI

Measurement Range: 0-30in.Hg / 0-30PSI

Power: 12V DC

Maximum. 0.3A

Fitment: Universal for most 12V vehicles

Package List: 1 x Turbo Boost Gauge, 1 x PVC Hose, 1 x Manual, 1 x Tee Connector


Anthony
Reviewed in Canada on March 1, 2025
Gauge works good but the LED backlight is just too bright. Lights-up the whole cab of my truck and I can see the reflection off the back window, in the front window! Have it wired on the dimmer but i have to turn my dash so low that I can barely see my dash gauges. Debating on replacing it with something else, or cutting a piece of window tint for the face of it
Joseph
Reviewed in Canada on January 18, 2025
seems to work decently, but makes hissing sound even though no air leaks.
Terry Danks
Reviewed in the United States on March 29, 2024
Not at this time.
E
Reviewed in Canada on September 6, 2023
Does not fit my car!! It says works for Porsches!
Christian Chartrand
Reviewed in Canada on August 10, 2023
2014 chevy cruze It works12.5 psi stable boost wastegate opens at 15 psi full trothle and vaccum is around 25to 30 at startup and with ac on is around 15 with the fans on you will need a few tools a place to install it and automotive wire protector for tube and wires a drill 2 sided tape and super glue for mounting to a pillar with Pilar mount and I used resistor to dim the superbright gauge due to my sensitive eyes its great
John Hickey
Reviewed in the United States on February 8, 2023
Spend the money for a good guage. This one is garbage. Needle doesn't even settle anywhere near 0 before even installed. My car makes 21lbs boost and the guage won't even reach zero. Absolute trash