Your cart is empty.
Your cart is empty.Product Description
Specification:
- Products are mainly used in:boat, trucks, automobiles, construction machinery, generator sets, ship engines, mining equipment, industrial machinery and equipment, petroleum equipment, air compressors and other machinery and tools.
- Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
- Part Number:Replaces S3240, R12T,S3213,S3227,802893t and so on.
- Maximum Flow Rate:30 GPH
- Inlet/Outlet thread size:ZG1/4-19
- Port/Connecting Size M18 X 1.5 Center Thread.
- Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns.
Easy install
Steps
Quick and Easy
- To drain
- Remove element from head
- Remove bowl from element
- Lube new bowl O-Ring
- Tighten bowl onto element
- Fill with clean filter
- Lube new filterseal ring
- Tighten firmly by hand
Easy to USE
How to use
1.When installing, put down the nylon collection bowl. Lubricate the O-ring of the filter.
2.There are 4 ports, two inputs and two outputs. We provide two plugs for the additional two ports. If two plugs are required, they must be installed on the filter and tightened.
3.Before installing the filter, you remove those plugs, plug them tightly with Teflon tape, Prevent these plugs from leaking.
Details
99% higher water separation
Reusable&Transparent Collecting Bowl
Self-venting drain for removing unwanted muck and water
fuel connector 3/8 inch output
Product Structure Diagram
1.10 micron filters are designed for high performance applications,and with flow rate of 30 GPH on the R12T model.
2.Your engine will perform better than ever with clean,water-free fuel.
3.Replacement gasket and O-ring are included with element to prevent leakage at mounting head and re-usable bowl.
4.The reusable transparent nylon collecting bowl allows you to clearly see the quality of the fuel used to know when to replace the nylon bowl.
Structure
- Mounting Hole
- Use for Air-Bleed
- Gasket
- 10 micron Filter
- O-Ring
- Nylon Water Bowl
- Water Drain
- 2pcs plug
JOSE L. Pineda
Reviewed in the United States on January 25, 2025
Very well made.
Jim
Reviewed in the United States on January 14, 2025
I bought this for filtering the diesel on my TDI swapped desert buggy. I have positive pressure (gravity) to the filter 24X7 and it's tight. I like the sight bowel on the bottom. Flows plenty of fuel for the 100hp TDI.
Cherie V.
Reviewed in the United States on September 16, 2024
Right out of the box; l noticed debris in the clear bowl. I tried to remove the bowl with a strap wrench to no avail. It took a 24" pipe wrench and an 18" channel lock to break them apart. Same thing to get the filter off of the metal head. Had some damage to the filter and bowl but still usable so l cleaned them and reinstalled them hand tight with an oil lube. Glad l was able to find this out before it was insllalled below deck when large wrenches would not fit.
Hippy Bryan
Reviewed in the United States on January 3, 2024
For the price of a filter, one can get this entire housing with hose barbs and clear water separator bowl with a filter to boot! No pipe dope or teflon tape are included, but should be applied to the 1/4" NPT hose barbs and plugs if they are used. Inlet/outlet on either side provides flexibility in mounting and arranging hoses. Plug on front can be used as a venting plug or for adding a pressure gauge. Great addition for a small motor on a boat, tractor, furnace, or anywhere that gas or diesel or something needs water and particulates removed. For the $20 price, it's a steal and is a great visual way to verify fuel condition and flow. By adding a fuel primer bulb to the inlet, one can prime the filter and purge through to the engine's fuel system.
Galina Strizheva
Reviewed in the United States on December 4, 2023
We've got two different R12T filter assemblies for the one on our boat which we were not able to separate from the main part that holds it to the boat - the filter was old and likely the resin gasket melted and merged the filter unit since my husband forgot to lube that part then he was changing the filter last time. After the struggle with the old, used filter, we've got this and one more similar unit in hopes of just changing the entire assembly.However, this brand new unit, although looking similar to our old one, is also not possible to disassemble, although it should have two parts of it to be able to be unscrewed with a gasket and o-ring in between all parts, the holder, the plastic bottom cup and the filter itself.So, while we were planning to change the entire assembly, we will have to do it as well instead of just changing the filter, since this one is not possible to disassemble at the beginning. It will serve, of course, until the next filter change time, but its replacement is a much bigger hassle than just replacing the filter, so only 2 stars.
Charles C.
Reviewed in the United States on December 20, 2023
Solid bracket, I did take it apart before installing, and glad I did, I had to use a filter wrench and considerable force to get the element off. I oiled the gasket (per instructions on the element) and only hand tightened it back on....like they should have done at the factory.
ReelNice
Reviewed in the United States on December 18, 2023
I normally use Racor filters, but they are so expensive and I was planning on installing out of the elements so I wanted to save some money and try this one. After opening it...you can't tell the difference between it and the racor. It's built well, the mount it robust and aluminum, the plastic is thick on the sight glass, and the paint job looks thick and good. I'll know more after a year in the marine environment, but just unboxing it I have high expectations. It also includes the brass fittings, which racors do not come with as a plus!
Matthew B
Reviewed in the United States on December 10, 2023
I'm very careful about where I fuel up my boat but a good filter is cheap insurance and this one works for me.
Recommended Products