Shopping Cart

Your cart is empty.

Your cart is empty.

Ritchey Comp Logic Threadless Headset

Free shipping on orders over $29.99

$32.95

$ 15 .99 $15.99

In Stock

1.Size:1-1/8- Inch


2.Color:Black


About this item

  • Ritchey standard logic headsets
  • Lightweight, precision-machined aluminium cups
  • Smaller upper scale angular cartridge bearing saves weight, larger lower bearings boosts strength and durability
  • Uses ritchey grease and sealed design
  • Anodized black finish headset


The Ritchey External Cup EC Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion.


汰郎
Reviewed in Japan on April 10, 2025
良くも悪くも普通です。コンプレッションリングがプラスチック製で割りが入ってるタイプでした。商品画像は旧モデルで届くのは写真のタイプで上下にリッチーのロゴ入り
Mike Erdody
Reviewed in the United States on June 6, 2024
Using to convert an old Mountain Bike to a gravel bike. Decent for that use however I wouldn’t trust it on a true Mountain bike
josh
Reviewed in the United States on May 18, 2024
Exactly what I expected. Great quality and perfect fit.
Joseph W Rome
Reviewed in the United States on January 30, 2024
I am not sure if it is my bike or the headset but I could not get it to tighten properly. Normally I tighten down until I feel resistance and back off a 1/8 turn at a time until I get it how I like it and there will be no play. But I could never get the play out of this headset no matter how much I torqued it. I put it in my spares box and when I need to replace a headset on one of my other bikes I will try it again.
C Shaff
Reviewed in the United States on April 23, 2024
Installed fine, Im sure it would work fine if it stays together. Had to work on my suspension fork and when I was reinstalling my fork somehow broke the bottom cup bearing. Red ring came out from around the dust shield. Bearing ring fell out and bearings immediately fell out of the ring. The bearings inside are also trash. Chinziest looking stuff. I know its not a King or a Cane Creek, replacing this junk w a Cane Creek 40, but I still expected it to be a bit better. Gonna try to return it, we'll see how it goes...
Salami
Reviewed in the United States on August 8, 2023
RITCHEY HEADSETS ARE GREAT. I HAVE NEVER WORN ONE OUT AND THE ONLY REASON I REPLACED THEM IS I UPGRADED THE 25 YEAR OLD FORKS THAT WERE ON MY SCWINN MOAB MOUNTAIN BIKES. THEY ARE REASONABLY PRICED, EASY TO INTALL WITH THE PROPER TOOLS AND RUN SUPER SMOOTH. WHAT MORE COULD A GUY ASK FOR. I WILL ALWAYS BUY RITCHEY HEADSETS. CHEERS TO ALL YOU FOLKS AT RITCHEY.
Peter
Reviewed in the United States on November 3, 2023
Nice seal and bearings.
Aaron Pearson
Reviewed in the United States on August 14, 2022
I love that this headset has sealed bearings and doesn't break the bank on price.
david machicote
Reviewed in France on April 29, 2021
Très bon produit monté sur mon vtc très content
Mike
Reviewed in the United States on April 11, 2021
It's a bike head set. Seems to work well, sealed bearings, includes star nut and crown race
HLR
Reviewed in the United Kingdom on August 4, 2020
A good solid yet affordable headset. Comes with sealed cartridge bearings but don’t be afraid to chuck a bit more grease on during assembly.Crown race is not a split one - which you would expect on a sealed cartridge unit - but that’s no bad thing as long as you don’t need to take it off your forks again.Installation easy and simple to follow instructions, for anyone unsure how it goes together.Tools for the job are pretty simple: you can install the new race using some pvc plumbing pipe, tap it into place on the forks to fit it. To fit the headset parts either use a headset press or careful persuasion with a couple of blocks of wood. Easy peasey.
Andreas Lehmann
Reviewed in Germany on March 22, 2015
Bei meinem Bike (BJ 2004) wurde mir die Federgabel geklaut. Da sich dabei der Steruersatz in alle vier Himmelsrichtungen verteilte (die Lagerschalen im Steruerrohr des Rahmens, der Gabelkonus auf der entwendeten Gabel, die Lagerkugeln unauffindbar auf dem Kellerboden), habe ich mich gezwungen gesehen, für den Einbau der neuen Gabel auch gleich einen neuen Steuersatz zu verwenden.Nach enigen Recherchen bezüglich der verschiedenen Standards von Steuersätzen habe ich mich dann für diesen hier entschieden, da er zu meinem Rahmen passt. Vorher war auch einer von RITCHEY drin und daher habe ich dann einfach wieder die gleiche Marke gewählt.Bei diesem Steuersatz hier sind die Lagerkugeln übrigens integriert und können nicht mehr rausfallen ;-)Tip: Der Einbau des Steuersaatzes ist ansich nicht wirklich kompliziert und mit etwas Recherche und handwerklichem Geschick auch schnell selbst gemacht. Für den Einbau des Steuersatzes wird allerding von den Herstellern die Verwendung eines speziellen Einpresswerkzeuges für die Lagerschalen und eines Aufschlagtools für den Gabelkonus sowie eines Einschlagtool für die Gabelschaftkralle vorgeschrieben bzw. empfohlen. Wenn man das im Leben nur einmal braucht und auch sonst keinen Wert auf den Punkt "Einmal im Leben selbst Gabel in Bike eingebaut" legt, dann bringt man die Einzelteile einfach zum Fahrradhändler des Vertrauens und lässt alles zusammenbauen.Ansonsten funktioniert der Steuersatz sehr gut. Er ließ sich gut Einstellen - danach hatte die Gabel kein Spiel mehr und die Lenkung war weiterhin ausreichend leichtgängig. Nach bisher gefahrenen 1.000 Kilometern weiterhin keine Probleme mit dem neuen Steuersatz.PS: Punkt "Einmal im Leben selbst Gabel in Bike eingebaut" wurde von mir natürlich erfolgreich abgehakt
b-boy
Reviewed in Germany on September 22, 2013
Dieser Steuersatz ist wirklich einfach zu montieren,sogar falls man es erstmal falsch einsetzt kann man es voninnen mit dem Schraubenzieher wieder rausdrücken, ohnedie schönen Schriftzüge und den Lack zu beschädigen.Das material fühlt sich wertig an und ist alles wiederzusammengebaut, ist jedes Rad optisch aufgewertet.Die Einbauhinweise mit Spezialwerkzeug finde ich überzogen,einfach eine kleine Holzplatte oder ähnliches Benutzen und sovermeidet man beim Eindrücken Beschädigungen.