Your cart is empty.
Your cart is empty.Product Description
Mirro Pressure Cooker Gasket
Features
Fits into the cover of a pressure canner or cooker, create a secure pressurized seal during cooking.
Replacing your sealing ring, when it with deformation and shrinkage, or steam leaks during pressurization.
Pressure Cooker Canner Gasket
Fit for Mirro Model M-0312, M-0312-35, M-0406, M-0416, M-0512, M-0512-11, M-0522, M-0522-11, M-0526, M-0526-11, M-0528, M-0622.
Diameter :about 12.6 in
All dimensions are approximate considering gaskets can stretch or shrink to fit specific lids.
To ensure compatibility, measure your old gasket and pressure cooker pot.
Mirro Canner Gasket
Compatible with Mirro pressure cooker 12qt/16qt/22qt ,
Fits many discontinued models.
Maintainance
GASKET After each use, remove the gasket from the Wash in hot, soapy water, Rinse and dry, Then slip the gasket back in place .
Simple To Install
Cleaning the sealing ring groove thoroughly before installation. Insert the gasket and press it firmly into the groove.
Mama1
Reviewed in the United States on January 6, 2025
Unfortunately, this ring did fit my pressure cooker, but it would not fit due to the thickness of the ring. If it had been thinner it would have worked. I broke down and used my Instapot to can my goods.
sheron
Reviewed in the United States on January 28, 2025
Canner seal, good quality looks like but never used!
Donald W.
Reviewed in Canada on January 12, 2025
This is the second gasket I have ordered. The first one started to leak after four uses. This second new one leaked from the beginning. Compared to my original gasket, this gasket seems thinner. Tried to contact seller with no luck.
ELise
Reviewed in Canada on August 12, 2024
Perfect fit.
Anything in 3D
Reviewed in the United States on July 4, 2024
This is a nice supple gasket. The diameter is correct for my mirro M 0522 pressure canner. It is a little thinner than the original although the origional is quite old and may be swollen a bit. It is too hot right now to test it and heat up the kitchen. It fit correctly so installation is a breeze. The price is ok.
Carol Carney
Reviewed in the United States on December 2, 2024
Worked great! Arrived promptly! Satisfied customer!
MARK T.
Reviewed in the United States on December 15, 2024
I ordered this seal for my old 16 qt. Mirro pressure canner as my old seal was leaking steam and the canner wouldn’t build pressure. The seal was just what the Dr. ordered as it fit correctly and restored my canner to working order.
Jon Ludwig
Reviewed in the United States on November 25, 2024
As good as an original gasket. Fits my cooker. Accurate listing.
Keith Keefer
Reviewed in the United States on November 19, 2024
My old one leaked, I think because of age it got a little hard. This new one fits perfectly and it’s soft
S. Nay
Reviewed in the United States on July 16, 2023
The diameter is perfect but the thickness of this gasket is maybe half of what it should be. I replaced a gasket on an old canner and did not compare the two. Unfortunately, we could not get the canner up to pressure because this gasket leaked so badly from being too thin. Don't waste your time with this one.
Maria Janzen
Reviewed in Canada on January 10, 2023
Finally got it yesterday when I needed it long time ago
Cocotinne
Reviewed in Canada on September 16, 2022
I took a chance and it fit...Thank you!
beatrice cloutier
Reviewed in Canada on March 17, 2022
ce que je cherchais pour mon vieux autoclave...
Recommended Products