Your cart is empty.
Your cart is empty.The new Shimano J05A-RF Resin Disc Brake Pad is designed to be quieter and more durable than Shimano's previous generations of brake pads for their 2-piston trail brakes. The new resin material gives us high-performance brake modulation for navigating tricky descents, while the finned alloy backer plate directs heat out and away from the brakes so that our brakes don't fade on long downhills.
User537983
Reviewed in the United States on February 24, 2025
Stops well, and wears well. Improved compound is quieter.
Joel
Reviewed in the United States on January 6, 2025
My experience is Resin pads stay more quiet not squeel when wet/contaminated like metal brake pads do.
Giorgio
Reviewed in Italy on January 20, 2025
...sono un po' troppo rumorose a freddo, soprattutto quando si bagnano. Basta anche una giornata umida e finché non sono a temperatura, fischiano di brutto
Buak
Reviewed in Germany on September 3, 2024
Sitzt gut in der BR-M6100.Arbeitet sehr gut, wie erwartet.Ob besser als die G05S-RX vermag ich nicht zu sagen.Aber nach einer längeren Abfahrt wird der Kühlkörper schon merklich warm.Irgend was wird's wohl bringen. :-)
Bruce Boyes
Reviewed in the United States on July 1, 2024
Replaced pads on multiple different mountain bikes with SRAM or Shimano brakes.
Emmanoel Porfírio Neves Filho
Reviewed in the United States on May 27, 2024
Original Shimano brake pad, very good and with great durability and low noise in dry use
Snel verzonden en goede fietspomp
Reviewed in the Netherlands on December 5, 2024
Best brakes. With cooling fins and no sound when braking. I ordered them again because the are so good.
A Cut Above
Reviewed in the United States on August 28, 2023
Super easy to install. No more squealing!Be sure to bed them in carefully: pedal up to 10 miles per hour, then brake gently on only *one* lever with gradually increasing force., but don't completely stop. Works best going slightly downhill (easier!). Do this five to ten times each for the front and rear brake.Easy to find install videos/instructions online.
JH in NE
Reviewed in the United States on July 11, 2023
I love to ride fast, but need to slow things down sometimes. Resin pads do that quietly and don't wear the brake rotors. These are at a great price point for genuine Shimano finned pads. Resin doesn't last quite as long as metal pads, but the run quiet where metal tends to honk when wet. This is an example of a product developed for the e bike world that is a benefit for regular human powered MTB'rs.
Hry
Reviewed in the United States on May 10, 2023
El producto es Shimano original, el problema es que la descripción del producto dice J05A y en realidad me enviaron J03A para que lo tomes en cuenta, ya no devolvió porque necesitaba los frenos, pero si te queda esa sensación que no te dan lo que compras.
JB
Reviewed in the United States on December 6, 2023
Replaced the stock metal pads on my shimano SLX brakes. Resin are generally quieter and work better in hot and dry climates. Make sure to watch a video or two on replacing them. These came with a cotter pin, however my brakes use a long screw to ensure the pads stay in place. These did not come with that style of screw in pin, so make sure you do not toss it. Watch/read on how to bed these in, you need to use them 10-12 times at medium speed to put some of the resin onto the brake rotor. If you are replacing stock metal pads, you also need to clean the rotors and buff them with sandpaper. Use youtube to find instructions on how to do that.
ALMARQUEZ
Reviewed in Mexico on October 23, 2023
Excelentes pero si recomiendo darle recorrido en calle un rato tyardan en agarrar bien el discopero si muy buenos frenos
Recommended Products
