Shopping Cart

Your cart is empty.

Your cart is empty.

SMA Male to N Male Cable 6ft RG316 SMA to N Cable 50 Ohm for WiFi Router,GPS Receiver,Antenna,Signal Booster etc

Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

1.Size:10ft


About this item

  • ⭐RG316 N Male to SMA Male Coaxial Cable 50 ohm (1PCS)
  • ⭐Cable type -- Flexible coaxial high temperature/moisture/corrosion resistance and good anti-electromagnetic interference RG316.
  • ⭐Premium Materials -- The inner conductor of this n type to sma cable is made of silver-plated copper,outer conductor made of silver-plated copper shielding braid,which could maximum protect the signal.Waterproof and flexible FEP jacket allows the sma to n cable exposure in outdoor harsh environments.
  • ⭐Stronger Connection -- The length of heat shrink tube that connect the rg316 cable and sma n connector is upgraded to 2.2",which can better protect the connector from falling off.
  • ⭐Applications -- This sma male to n male cable connect from sma equipment to n type antennas,used for 3G/4G/LTE/Ham/ADS-B/GPS/RF radio to antenna or surge arrester use (Suitable for outdoor antenna or remote antenna connection to indoor amplifier.)



Product Description

n male to sma male

MOOKEERF RG316 N Male to SMA Male Extension Cable

  • Flexible high temperature/moisture/corrosion resistance and good anti-electromagnetic interference RG316 coaxial cable.

  • N type connector allows you to connect devices with N female connector, such as antenna, wifi signal booster, ADS-B receivers,surge arrester etc.

  • SMA connector allows you to connect devices with SMA female connector,such as 4G LTE modem /router /RF Radio to Antenna etc.

RG316 COAXIAL CABLE

Low Loss Low SWR

  • High density tinned copper braid shields of our sma to n cable supports better signal transfer with minimum signal loss over large distances and higher frequency use.VSWR≤1.15.

High Quality

  • The inner conductor of this n type to sma cable is made of silver-plated copper,outer conductor made of silver-plated copper shielding braid,which could maximum protect the signal.
  • Waterproof and flexible FEP jacket allows the sma to n cable exposure in outdoor harsh environments.

Stronger Connection

  • The length of heat shrink tube that connect the rg316 cable and sma n connector is upgraded to 2.2",which can better protect the connector from falling off.

APPLICATIONS

  • wifi signal booster
  • ADS-B receivers
  • surge arrester
  • 4G LTE modem
  • wifi router
  • ect.
sma male to n male

Michael D Meek
Reviewed in the United States on February 27, 2025
Great patch cable at a good price - would order again! Low loss - does what it should.
Steve Noel
Reviewed in the United States on August 28, 2024
Worked great!
Michael Ingle
Reviewed in the United States on July 3, 2024
Works fine for connecting a Meshtastic device to an outdoor antenna. Got a good signal using this cable.
Perky Cleaner
Reviewed in the United States on July 21, 2024
Works well, not much lost adding this transition to be able to use my larger antenna with my handheld. Great value for the money getting two in a pack. Quality is pretty good and performance is gr3eat as well. Will buy from this brand again.
Wellbeing56
Reviewed in the United States on March 2, 2024
I bought these to test a dummy load that a friend put an N connector on. I chose 2-footers because 1-footers seem to develop loose connections after like a week of use.The package (fancy ziplock bag) arrived partially open, but the leads were still in it and undamaged. I've purchased many other similar cables and connectors which came in similar packaging and were fine. In addition, the shipping bag these leads came with was torn and taped, so probably not the manufacturer's fault??I was immediately surprised and impressed that both ends of the coax came with nice caps, and both ends were finished with 2" of adhesive-lined heat-shrink tubing. Most manufacturers seem to scrimp here with only 1" of heat shrink. With RG-316 coax, the leads can use all the strain relief they can get, so color me impressed there.VNA test results on each cable yielded 0.12 dB loss at 500MHz on both cables, and 45.5 ohms/2.39 nH and 46.1 ohms/2.33 nH respectively.My only other comment is that the N connectors felt a little crunchy (not bad, just a little) while tightening them down. At this price point, I wouldn't expect perfection, so I'm not upset by any means.All in all, these are great, budget-friendly little test leads!
Justin Priami
Reviewed in the United States on October 27, 2024
These are decent cables for the money. Seem well assembled. Nice and flexible for testing things.
Nylo
Reviewed in the United States on October 21, 2024
These cables take the stress off of the chassis connectors. I perform the calibrations with these cables attached, making my unit literally more flexible and able to connect to coax cables and exterior devices with less jostling of the VNA unit. I use the SMA calibration kit on the ends of these cables to move my reference plane of analysis to the cable ends. It's a good way to use your VNA and help it last with less handling and damage to connectors.Note that when you do this, you must store the calibration in the unit, and measurements are only good if you recall that calibration and use the same cables for your measurements.See the attached photo, which shows the short SMA cables that came with my unit along with N to SMA adapters. These worked okay but I wanted longer cables for my kit.
Bob
Reviewed in the United States on April 22, 2024
Works great