Your cart is empty.
Your cart is empty.Get your wheels lined up correctly with this alignment kit from Speedway Motors. We've combined several of the quickest and simplest ways to align your front end into one easy kit so you can get your car dialed-in to dominate! Kit Includes: Alignment Turn Plates, 0-20 Degrees At only 5/16 in. thick, you don't need a jack or lift to roll onto these turn plates. They're made from aluminum and are clearly marked at 0, 10, 15, and 20 degrees, with one-degree increments in between. The Speedway alignment turn plates have a smooth handle cut into them for portability, and the bottoms feature a thrust bearing between the plates, so turning the wheels for precise alignment is smooth and accurate. Longacre 52-78260 Caster / Camber Gauge w/ Magnetic Adapter Reads camber from +6 deg. to -6 deg. accurate to 1/4 deg. Caster readout from +12 deg. to -4 deg. in 1/2 deg. increments. All vials are individually checked for accuracy and assembled on a precision fixture. All critical surfaces are CNC machined for accuracy. New stronger magnetic adapter - dead flat surface for accuracy, won't chip or flake. Comes with silver carrying case. Longacre Racing 79501 Aluminum Toe-In Plates w/ Magnets Here's the quickest and simplest way to measure toe-in. Rest one of these plates against the tire on each side and use a tape measure. Longacre toe plate comes with two tape measures. Quickest and simplest way to measure toe-in. Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included) Formed design is rigid for accuracy and stays put against the tire. Dimensions: 23-1/2" x 9" Notes: Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first. Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel. Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out
