Your cart is empty.
Your cart is empty.
Stanley Security BP150N41 Bypass Hanger # 405304
Customer
Reviewed in the United States on August 7, 2024
I have 4 sets of these in my house from when we did an addition 10 years ago. Generally they work fine. However, I just had to cut a set of them out because the quick release latch would not work on either set of rollers on the door. The door just wasn’t rolling well anymore. I wanted to adjust the rollers but the builders didn’t leave the adjustment wrench when they were installed, so I had to remove even more of the door than necessary to try to make the adjustment. And that is because instead of a 3/8” adjustment nut that every other brand seems to use, this uses a 1/2” adjustment nut. I can’t find a 1/2” pocket door wrench online even. So the only way I could get to it was to remove extra trim so I could get to the nut with a straight wrench. Even that was limited because of the thickness of a normal wrench. If the hardware would have released I could have pulled the door out and made the adjustments. Now ultimately it turned out that there is another issue with the door that required me to remove it. But even so, I never should have ended up in a situation where I had to cut the hardware. Even with the hardware off and using tools to manipulate the release mechanism and pushing directly on the pin it still won’t release!
greg
Reviewed in the United States on June 26, 2024
as ordered
Customer
Reviewed in the United States on March 27, 2024
Exactly what I needed. Try so many that I had to send back, but this one was perfect.
Robert Burman
Reviewed in the United States on June 13, 2023
Original quality and they work great
DD
Reviewed in the United States on May 3, 2022
Fit our pocket door perfectly
Customer
Reviewed in the United States on December 13, 2021
Arrived on time, price was good--especially since none of the big box stores carried it. The orange one didn't even know such a product existed. These fit the existing 20 y/o pocket door track (1.75") perfectly.Found a couple of YTs on the install to compensate for lack of instructions or a web link that led me thru the Stanley kb to determine the offset from the door edges. Min was advertised at 7/8" (.875") so I moved mine to 1" and then a bit more to center them over the rail and stile joints. My door was a solid oak, 6 panel unit and was very heavy. I wrapped a cargo tie-down strap around the door to create a lifting point, then guided the pendant bolts into the top brackets without a problem on the first try--yee haw! Locked the brackets and all is well. Thanks Stanley!
Martha
Reviewed in the United States on January 29, 2019
Have not installed yet for really heavy pantry pocket door yet (waiting for father-in-law to help my husband since door is also at a tight space and needs another set of hands). Hubby says it looks like better quality and design. Should work better than the cheap one he has replaced twice from Home Depot. Four stars for better quality and design.
Shiela G. Milan
Reviewed in the United States on March 28, 2017
Awesome hardware. My husband built custom by-pass doors that are oak and solid glass. The mechanisms supports the weight of the doors which allows them to open, close, and by-pass very smoothly.
Recommended Products