Your cart is empty.
Your cart is empty.Product Description
Easier work:
- This tool slips into place under an easily removable inspection plate. Worked great at holding the engine solid while loosened (and tightened) the crank pulley on Duramax
Flywheel Locking Tool for 6.6L Duramax
Function
- Use to lock flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
- Saving time and energy without removing the starter for the water pump replacement.
High Quality
- Made of high-standard CRV steel, the flywheel locking tool is anti-rust , corrosion-resistant, and durable to use.
- To meet your needs and serve you for a long time
Duramax 2500 & 3500 Flywheel Holder
- Work on 2500 and 3500 pickups, remove the metal spring-loaded inspection plate on the bottom of the transmission.
- The tool should slide into an opening toward the engine with the top of the tool engaging the teeth of the flywheel.
36mm Socket
- Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation.
- 36mm 12 point socket can also be used on axle nuts.
Duramax 4500 & 5500 Flywheel Holder
- Work on 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission.
- Insert the tool at the front of the opening to engage the flywheel and hand tighten the bolt to hold the tool in place.
Christopher Amos
Reviewed in the United States on October 28, 2024
Perfect fitment. Worked as described
ThiccNicc
Reviewed in Canada on January 9, 2024
Worked as intended
Del L.
Reviewed in the United States on June 5, 2023
It was a easy use but impossible without job without it. If you are doing a water pump must have it
Mastiff mama
Reviewed in the United States on May 27, 2022
This tool works for exactly what I needed it for
moises Ontiveros
Reviewed in the United States on December 31, 2022
Metal is good and sturdy. Socket is 3/4 so you will need a reducer to use a 1/2 breaker bar.
JCR
Reviewed in the United States on February 2, 2021
The socket fits a little loose on the bolt but it may be the bolt that is worn. Haven't used the flywheel locks.
Stephen Jordan
Reviewed in the United States on February 15, 2021
Did the job with ease
chris walker
Reviewed in the United States on April 4, 2021
This worked perfect,u can't go wrong
David Miramontes
Reviewed in the United States on August 31, 2020
Works perfect 👍
Recommended Products