Shopping Cart

Your cart is empty.

Your cart is empty.

Taidacent Din Rail Type RS485 Modbus RTU PLC Control 0-20mA 4-20mA Signal Generator Current Signal Generator DC24V Adjustable Valve Analog Current Simulator with Display (RS485 4-20mA Output)

4.6 (1) Write Review
Free shipping on orders over $29.99

$34.58

$ 15 .99 $15.99

In Stock

1.:Only 0-20ma Output


  • Model Number 4 to 20ma signal generator Power supply DC 15V to 28V Power consumption Less 2W
  • Output current range 0mA to 22mA adjust (default 0-20/4-20mA) Output adjustment accuracy 0.1mA, error <0.05mA
  • Load sampling resistance <500 ohm Working Temperature 0-40C,RH<80%
  • Press and hold the knob for 2 seconds to enter the parameter setting, the parameter number "FO1" is displayed, when the parameter number is displayed, rotate the knob "+" and "-" to modify the parameter number, then press the knob to modify the parameter value, and press the knob again to save and exit ;
  • Adopt standard MODBUS-RTU message format, slave mode address 1-127 (factory setting 1), baud rate 2400-57600 (factory setting 9600), no parity; There is no 1209 terminal resistance inside. When the bus speed is far away and there are many devices, the user needs to connect the terminal resistance to make the transmission more stable; the use of high-quality shielded twisted pair can increase the anti-interference ability of communication; MODBUS-RTU message format , commands and examples:


Product Description

1.1 DC24V supply voltage range: DC15V---DC28V

1.2 AC AC220V (optional) power supply range: AC85-264V or DC110-370V

1.3 Power consumption <2w

1.4 Output current range: 0 to 22mA (it can be set, default setting 0-20/4-20mA); Output voltage range:0 to 10V (it can be set, default setting 0-5V/0-10V)

1.5 Output adjustment accuracy 0.1mA, error <0.05mA, load sampling resistance <500 ohm. Output regulation accuracy 0.1V, error <0.05V, output maximum load current <20mA

1.6 Working environment: 0-40℃, relative humidity <80%

Size

voltage current signal generator

Connecting

Voltage Current signal current Connecting

System operation (turn clockwise for "+" and turn counterclockwise for "-", press the knob for "OK")

Press and hold the knob for ⒉ seconds to enter the parameter setting, the parameter number "F01" is displayed, when the parameter number is displayed, rotate the knob "+" and "-" to modify the parameter number, then press the knob to modify the parameter value, and press the knob again to save and exit ;

Parameter description table

Parameter for voltage current signal generator

RS485 communication

RS485 slave address 1 byte
Function code 1byte 03 or 06 command
Data N byte
CRC check 2byte stanrdard crc16 start value 0xFFFF
03 multiple registers command for example: query 20 registers starting from address 0, return 40 bytes of data
Send 01 03 00 00 00 14 45 C5
Return 01 03 28 00 00 04 BO 04 BO 04 BO 00 01 00 00 00 01 00 01 00 02 00 0000 00 00 01 03 20 00 0A 00 00 00 00 00 00 00 00 00 00 00 00 98 EE
06 Set single register command for example: set the value of register 3 to 2000, return the command directly

Farid
Reviewed in the United States on April 4, 2023
Very nice product.
Recommended Products
SainSmart 5 Axis Breakout Board for Stepper Motor Driver CNC Mill

$21.99

$ 8 .99 $8.99

4.7
Select Option
4Pcs 1.8v 3v 5v 6v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK Adjustable Driver Switch

$8.99

$ 4 .99 $4.99

4.4
Select Option
BlueStars 10-55V 12V 24V 36V 48V 60A 15KHZ PWM DC Brushed Motor Speed Controller Switch with LED Display, Stepless Control, and Forward-Brake-Reverse Switch for Power Wheels Regulation

$13.49

$ 5 .99 $5.99

5.0
Select Option
Professional PLC Developer and Training Starter Kit for Engineers, Programmable Ladder Logic Controller, Software & Power Supply

$199.99

$ 98 .99 $98.99

5.0
Select Option
Franklin Electric 5800020610 Pumptec Motor Protection Device 115/230v 1 Phase 1/3-1.5 HP ***GENUINE FACTORY NEW!***

$389.00

$ 99 .00 $99.00

4.4
Select Option
DC Brushless Motor Controller, WS55-220 DC 48V 500W CNC Controller High Speed Brushless Spindle BLDC Motor Driver Controller Analog Speed Regulation Motor Driver

$45.70

$ 22 .99 $22.99

4.5
Select Option
Nema 34 Stepper Motor 6A 8.5Nm (1200 oz-in) 118mm Length for CNC Router Mill Lathe, Black

$59.00

$ 30 .99 $30.99

4.9
Select Option
PWM DC Motor Speed Controller 9V-60V, 20A Brush Motor Driver Controls Module 12V 24V 36V 48V 60V, DC Speed Regulator Pulse Width Motor Driver 1200W PWM Monitor Dimmer Governor with Switch Knob

$11.99

$ 5 .99 $5.99

4.7
Select Option