Your cart is empty.
Your cart is empty.These high-quality tuners made by Gotoh Japan are commonly used to replace the standard tuners on Fender Stratocasters, Telecasters and other models. They are a drop in replacement for these models, making replacing tuners a simple task. Locking tuners have a mechanism which locks the string in place. This eliminates the need to wind the string around the post, reduces tuning problems and speeds up restringing. There are two types of locking tuners, front-locking and rear-locking. Rear-locking are easier to use than front-locking but are not available with height adjustable posts. Gotoh brand guitar hardware is known for its quality and durability, making it an excellent choice for any new guitar or replacement.
Apollinaire
Reviewed in the United States on August 12, 2022
Installed a Vegatrem and needed high performance tuners. These are amazing. I’ve never had a guitar stay in tune so we’ll as my current with these installed. Also, I didn’t need string trees with these, as the break over the nut is sufficient thanks to the staggered tuners. Great purchase.
Doug
Reviewed in the United States on March 23, 2022
I added a Vega Trem to my Strat and found it difficult to keep it in tune. Bought these and installed them (exact replacement) fixed the tuning issue. Also look great and even comes with the bushing tool. Gret value great product.
Customer
Reviewed in the United States on January 17, 2022
Fit right on my strat. Staggered heads so you don’t need string tree. Stays in tune.
L. M. Karr
Reviewed in the United States on July 27, 2021
These were easy to install but be patient and take your time. There are many Strat and Tele style guitars these will drop right in especially if you have the vintage style tuners that look very similar. I installed these on a Squier Bullet series Strat. The holes needed to be bored out to accommodate the bushings for the new tuning machines. I ended up getting the holes close to the right size by using a 5/16 drill bit but the bushings would not quite fit. I used an 11/32 drill bit IN REVERSE to get the holes the perfect size to provide a snug fit for the bushings. I tested with a piece of wood and experimented until I came up with the solution. If you go forward with the 11/32 bit, it will make the hole too large and the bushings will not stay seated and cause some unwanted rattling. When installing the screws on the back get your tuners lined up with the bushings in place by using a straight edge and slowly start making your pilot holes. I started with the low E string tuner to the high E and it worked out well. As you can see in the photo, the old holes were almost all completely covered. These tuning machines are great and I definitely recommend them if your looking for a locking tuner with a vintage look and feel.
Gregory B.
Reviewed in the United States on November 25, 2021
I have these on all 7 of my strats and tele' 's to replace Kluson vintage. these are excellent
Chris g.
Reviewed in the United States on September 5, 2020
I bought these for my fender modern player telecaster. They are smooth, easy to install and keep in tune. High quality locking tuners
tvar
Reviewed in the United States on May 20, 2020
I bought a 60s Fender neck its a perfect fit great product stays in tune.
Recommended Products
$54.81
$ 27 .99 $27.99
$102.06
$ 46 .99 $46.99