Works as it should nothing to complain about

I recently bought a used Nikon camera and unfortunately there was no included cables. This cable is exactly what I needed. The camera itself has rechargeable batteries, and now with this cable, I don’t have to take the batteries out of the camera and use an external charger. This cable is a perfect replacement. I have had no issues works amazingly to charge the camera.

This cable works perfectly with my Nikon camera. It’s well-made and flexible, and the cable quality is above average. It’s working as expected and fits directly into the port in my D5000. The data is high speed and it’s a good value.

I misplaced my camera cord and this version of cord is not very common. I bought one on Amazon and it didn’t work well, but this one worked on the first shot!

Lost the original cable for Nikon and this is a solid replacement. The cable connectors are put together well and there have been no issues so far plugging this in.

AMAZON VINE Review of the AlyKets UC-E17 CableI ordered this replacement CHARGE/DATA TRANSFER cable from AMAZON for my 2013 Nikon D610 DSLR camera. The camera was having trouble transferring images and EXIF data to both Lightroom and Photoshop. Basic troubleshooting identified the ELEVEN-YEAR-OLD original Nikon cable as the problem, and I immediately searched AMAZON for a replacement.This new cable from AlyKets is purpose-built for DSLR cameras and more than thirty Nikon models use this particular cable. My D610 is on that list.This is a QUALITY cable made of sturdy oxygen-free copper cores sheathed in individual flexible polyvinyl shells with STRAIN RELIEF RUBBER HOODS added to the ends for insertion and removal into CAMERA and COMPUTER ports. Those rubber GRIPS on the end of cables allow you to pinch the cable between your thumb and first finger for easy removal and insertion WITHOUT pulling on the cable itself. Pulling on the cable rather than those small grips is how cables fail as repeated pulling will eventually stretch the underlying copper until it separates. Losing even a few strands of copper will degrade the transmission quality of the data moving through the wire.These AlyKets cables ALSO have a solid plastic “lump” surrounding one end of the wire. Most quality cables have this lump. This is a Ferrite Bead, and it is an essential part of electronics safety. Without it, a lot of electronics would malfunction. They are indispensable because they suppress EMI/RFI. Electromagnetic Interference or Radio-Frequency Interference when in the radio frequency spectrum, is a disturbance generated by an external source that affects an electrical circuit. It MIGHT cause static on a radio, or “ghosting” of images on a TV, but on a computer transferring DATA and IMAGES from a camera it can cause a LOSS or INTERRUPTION of SIGNAL so your best images from today are incomplete or missing entirely.Quality cables, like these from AlyKets, have Ferrite Beads.Take a look at the attached pictures. You will see an image of the “unwrapped” cable and all the shielding of the copper cores inside the cable. That diligence increases the transfer speed of this cable by AT LEAST 40 PERCENT! In perfect conditions, as in a server room or going from FAST SSD MEDIA to FAST SOLID STATE STORAGE the rate through the Ferrite Bead equipped cable can nearly double. You WANT to see those Ferrite Beads on your data cables!My LAST cable lasted ELEVEN YEARS and it was NOT constructed nearly as well as this current one from AlyKets. If you are in the market for a camera cable, data transfer cable, or power delivery USB-C cable look for the AlyKets offerings on AMAZON. You will not be disappointed with your choice.These cables are HIGHLY RECOMMENDED.This AMAZON VINE Review of the AlyKets UC-E17 Cable is FIVE STARS!Five Stars for Internal and External Shielding, Oxygen-Free Copper Cores, Strain Relief Tips, and Ferrite Beads!Thanks, AMAZON!Mark in North Carolina

The Reason for Selection:I needed a USB cable for tetheringThe Good:It worksThe Bad:Should be longer to make it reach my tripod.The Ugly:Nothing Ugly.General observations:Ideally, this cable should be about 10' longer for my studio, but it works.I tested a Nikon D750 with Capture One loaded on a Mac Mini. All tethering functions work as expected. To solve the length issue I used a USB-C Female to USB Female adaptor to extend the length using an existing USB C cable and all worked as expected. In addition to tethered shooting, I can access all functions and camera settings via the Capture One software.The other thing that would improve this cable would be if the camera end was at a 90* angle. Otherwise the cable is constructed well.The one thing that does not seem to be available is the camera SD card does not show up as a drive in Finder with this cable. That is most likely because of the camera setup and not because of a flaw in the cable.Value for Price:From my perspective and experience, the price of $9.98 is Fair.

I got this to charge my old Coolpix. It plugs right in and powers it with no problem. The plug and cord are sturdy.