Your cart is empty.
Your cart is empty.
This LED navigation lights is designed for dusk flying lovers, you will no longer worry about the safty of flying in the night, the cool flashing lights will give you the difference flight experience, and enjoy the free flying in the night.
Specifications：
Package Weight: 50g
Product Weight: 5.5g/pcs
Product Size：47mm*13mm*12mm/pcs
Charge Voltage: 5V (Max 1A)
Working Voltage: 3.7V (w/ low-voltage protection)
BATT Capacity: 3.7V 85mAh
Charge Time: About 60min (w/o Reverse protection)
Working Time: About 180min
Function:Navigation lights for RC Models
Features:
1.Water droplet type super streamline design.
2.Miniature volume and ultra light weight.
3.High brightness LED lamp beads.
4.One-touch to change three blink mode.
5.Navigation light cooling system.
6.Convenient to charge the LED Navigation light via USB portable charger.
Package Include:
1 x Red Light, 1 x Green Light, 1 x White Light
1 x Balance Charging Cable
1 x Micro USB Charging Module
6 x 3M Adhesive Film
3 x Protection Film
1 x Plastic Case
Note:
1. Please refer to the size of the avigation light to see if it fits to install on your models.
2. The charging port is marked positive and negative, please plug it carefully while charging, otherwise the lithium battery and circuit board will be burned.
3. Please charge the led light with special balance charger for lithium battery, such as CB86, PL8, A6, also you can use the micro usb charging module. Especially the led light has not been used for a long time and under the low voltage, you must to use micro usb charging module first.
4.The micro usb charging module support portable power bank charging, please notice the maxmium charge voltage is 5V 1A.
SAAJAAN00
Reviewed in the United States on March 4, 2024
The media could not be loaded.
Douglas Martin
Reviewed in the United States on February 8, 2024
The media could not be loaded.
Darren Stevens
Reviewed in the United States on August 6, 2023
These work very well they charge quickly and last a long time you get four different flash patterns and they have a nice aerodynamic shape I put these on my RC airplane and that makes it way more easy to tell I was oriented in the sky at distance my only criticism would be that the Velcro that comes with it is not very strong and I would suggest supplying your own name brand Velcro. I like these so much I bought two more sets . So I could have some more and I would have a total of three charging cables so I can charge them all at once.
Sandy
Reviewed in the United States on March 1, 2021
The LED Easylights are great looking and easy to install and charge up. They will work great on my .60 size Tucano RC plane. I am also going to put a set on my new Hangar 9 P-51 20 CC Mustang. These lights are wireless and no hassle to install. Great for any RC planes application.
Tomalaya
Reviewed in the United States on January 2, 2021
The media could not be loaded.
ImNotARobot
Reviewed in Canada on April 28, 2021
The media could not be loaded.
Dont worry bout it
Reviewed in the United States on April 24, 2021
The media could not be loaded.
Customer
Reviewed in the United States on September 2, 2020
The media could not be loaded.
Larry
Reviewed in Canada on September 8, 2019
Extremely bright LEDs, they have 3 modes of operation with each push of a button, They charge with a phone charger. I use these on my RC model airplanes. Members of my club also ordered some for their planes. Will order more later.These light LED modules use double sided tape to stick on a surface and come with the units.
B. Ross
Reviewed in the United States on October 16, 2019
I debated over what kind of lights to get. For the price of one I can get three: red, green and white. And I could send them back if I didn't like them. The first thing I noticed is that these are VERY BRIGHT. I ended up putting a piece of velcro on each of my 4 batteries (the soft side). I put the harder side cut to the white strobe. Then, as I changed batteries, I could just put the strobe on. Also, the strobe is towards the back and, as you can see, balances the Mavic perfectly - good spot for the white strobe. Next I thought about the navigation red and green. I was going to put velcro on the real arms (the folding ones) and I noticed that they will fold with the light attached. The only thing is that they are just a fraction too long to secure to that arm. I used my dremmel to file it down (the smaller tip of the strobe) and it fit perfect without compromising the seal of the strobe. HOWEVER, I finally decided to just velcro on top towards the back of the strobe (my concern was that if up front the flashing might interfere with the filming). I am a commercial pilot and this is the perfect spot for many reasons. 1) If it gets lost in the woods or water - it will continue to flash for a bit. 2) All planes have a rotating or flashing beacon on top of their tails. The only BIG complaint I have is the really Micky Mouse way they are charged. The wires break easily- careful pulling their out. I wish their was a STANDARD cord and charge that you could use. Once that diode goes out - you will not be able to charge it. If someone has come up with a solution, please post. What about the Green light? Well, I put velcro on the right rear arm IF I wanted to put it there. But I am really liking the RED on top and WHITE underneath. Looks pretty cool too. And even if just using two, it is still a better deal. And I think they look better than the other square strobes out there. And just remember: FLYING is the second greatest thrill known to man! The first? Landing, of course.
Recommended Products
$16.99
$ 8 .99 $8.99