Your cart is empty.
Your cart is empty.Product Description
Long Range WiFi Wireless Bridge Supports 5KM for PTP/PTMP
ULNA CPE412 is a 100Mbps wireless bridge. It uses wireless communication technology to transmit network data using air as a medium, one as a receiver and the other as a transmitter for long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks. 5.8G long distance transmission with 14DBi high gain antenna, up to 3KM. The transmission speed between 2 long range wifi bridges max is 300Mbps
Switch Master-Slave Bridge
Switch button to"A" indicates the bridge as the master bridge (transmitter), switch button to"B" indicates the bridge as the slave bridge (receiver), a pair of bridges is already preset with A and B, no need to set them again. Note that in the point-to-multipoint application, one of the bridges is used as A and the other bridges are used as B. Then set them both to the same channel number to complete the point-to-multipoint pairing
Rotate 360°
Outdoor wifi bridge kit equipped with a universal wheel, it can rotate 360 to any angle. Easy to adjust antenna orientation for maximum signal strength
Installation Tips
The master bridge and slave bridge are installed face to face, the antenna is not omnidirectional, it has a 60-degree transmission angle, no magneto-electric interference in the middle, and a straight line installation without obstructions will get the best performance.
Elevator Monitoring Application
Using a wireless ethernet bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. The wireless bridge is easy to install, supports point-to-point and point-to-multipoint, and can be disassembled and moved to other places for use.
Watchdog Function
Bridge with watchdog function. When the wireless outdoor CPE Kit communication fails, the corresponding unit will automatically detect and restart, restoring network communication by itself
Package Included
2 * CPE412 Wireless Bridge
2 * POE Adapter (24V)
2 * Cat 5e Network Cable
2 * Metal Hoop
1 * Mounting Screw Set
1 * User Manual
Pole Mounting
1. Put the included rubber into the bracket.
tabs on the bracket.
2. Plug the dynamic stick into the bracket.
3. Screw the sealing nut and assembled parts, as well as tighten it.
4. Put the nock washer on the dynamic stick.
5, Assemble the mounting parts to the EnStation.
б.Thread the open end of the pole strap through the two tabs on the bracket.
7. Lock and tighten pole strap to secure bracket to the pole
Wall Mounting
1. Put the included rubber into the baracker.
2. Plug the dynamic stick into the bracket
3. Screw the sealing nut and assembled parts, as well as tighten it
4. Put the nock washer on the dynamic stick.
5. Assemble the mounting parts to the EnStation
6. Determine the mounting location. Mark and drill two
7. Put wall anchors into the holes and insert screw into the wall anchor.
8. Screw and secrue the bracket in the place
Features
14dBi antenna
5.8G channel
27dBm wireless speed
Transmission distance up to 3 km
Support PC side to modify IP settings
Dialing to set the transmitter and receiver
WDS networking mode, video network dual compatibility
Dynamic MIMO power saving mode (DMPS) and automatic power saving transmission (APSD)
PTP/PTMP Wireless Bridge
Application Case1:
This was easy to install because I already had a set of bridges but I needed a faster speed of bridges to get my internet and cameras on a better data transfer. This was just what I needed. Setup was easy change the POE injector from the old bridge with the new ones and power the new bridges up. Made sure the master was A and the slave bridge was b and made the channel for both C and I was up and running. I getting 95mbs from file servers in my shop to my file server in my home through the bridges. This is a cheaper option than network cables in the ground my distance is 3500ft between my shop to home. Very satisfied with these bridges.
john
Reviewed in the United States on March 25, 2025
Works good! Easy install. Love having internet in my shop.
Sam R.
Reviewed in the United States on February 9, 2025
Very easy to set up and works great. Sent WiFi to the shop over 1000 yards away and works flawlessly.
James Martin
Reviewed in the United States on June 30, 2024
Easy setup and the results were amazing! Very fast wifi to the building. Approximately 200ft wifi bridge.
Friedman Wagner-Dobler
Reviewed in the United States on June 28, 2024
Product supports only passive PoE; it does not work with PoE (IEEE 802.3af/at). Also, per tech support, CPE412 does not support VLAN tags and does not allow VLAN tagged traffic to pass over (IEEE 802.1q).
McGalla
Reviewed in the United States on November 17, 2024
The first one stopped working after 5 months. Customer service was great and after their solutions failed they shipped me a new CPE402, different model but same thing. The replacement one lasted 5 months and stopped working. I reached out to customer service to see what they can do.
Customer
Reviewed in the United States on October 17, 2024
Works great. Big tip: You must have Cat 5 or 6 networking cables - don’t go higher and Order cables with your unit in the lengths you need to reach two outdoor line of sight locations. Two included are very short. Not fussy to line up. Once installed speed is good and consistent. I reached out for support and got a quick helpful response. I am not savvy about anything digital but still managed to end up with a working access bridge!
Johna Brock
Reviewed in the United States on December 26, 2023
Very easy set up and no fuss it runs, shooting internet about 300 yards to next house definitely need router on end to shoot better wifi not just a extender .
End User
Reviewed in the United States on April 6, 2023
The instructions are confusing but the product works like as it should , I plan on extending our system to other buildings and will likely be buying these again.
Recommended Products
$135.99
$ 53 .99 $53.99