Your cart is empty.
Your cart is empty.Product Description
Mr
Reviewed in the United Kingdom on March 9, 2025
Good value. Obviously you get what you pay for. The connectors will just about take an AWG 8 silicone. I crimped mine with a proper tool. Ideal if you're swapping lithium batteries a lot.
Bob Swenson
Reviewed in the United States on June 8, 2024
Very easy to install and use. I put this on my motorcycle because when/if you need a jump start, you don’t have to dismantle anything
R H.
Reviewed in the United Kingdom on November 23, 2024
The guy saying there were only male connectors is wrong. This type of connector has no male/female. Each connector mates with the same connector. You just turn them over and the prong goes into thesocket on another of the same connector.This is compatible with the Anderson SB50 connector.
PCT
Reviewed in the United States on November 23, 2023
Worked with Anderson and K T
karri
Reviewed in the United States on March 9, 2022
Good item
GIUSEPPE
Reviewed in Italy on December 18, 2022
Okay
Mike
Reviewed in the United States on November 25, 2021
Worked perfectly
Jota
Reviewed in Spain on December 24, 2020
Todo correcto , conectores muy prácticos.
FT DIFFUSION
Reviewed in France on August 6, 2019
Connecteur too
DWAZ
Reviewed in the United States on August 27, 2019
I used these to connect solar panel to my pontoon boat. They allow me to easily connect or disconnect wires to the batteries.
Scott and Mia
Reviewed in the United States on July 1, 2019
Great disconnects, good quality on all parts, perfect dor trolling motor or small winch connections
I-Fly4Fun
Reviewed in the United States on December 23, 2019
Price, quality and delivery time are all excellent. As long as you are able to use only this brand of connector (labeled AITM Connector), You should have no problems. However, if you intend to have the ability to use this with Anderson SB-50 connectors, disconnector will not work for you. The attached picture shows specifically what has been done to this brand so that it is not interchangeable with the industry standard. I'm not sure of the purpose of this, could have something to do with patent or other legal issues but I have no knowledge of that. You can see in the photograph that the mating lug in the center of the connector is roughly twice the height of that on an Anderson SB-50. It is only the height of the lug that prevents these connectors from mating with Anderson.. but for that everything else appears to be virtually identical. The quality of the silver plated contacts, thus far, appear to be excellent.UPDATE 12-28-2019Although I've not found verification of my theory, I believe there might be a reason for different lengths of the tab as identified in my original review. The items I purchased came with contacts sized to crimp or solder onto (only) 10-12 ga wire. The red Anderson connector (as shown) had contacts sized for 2 to 4 ga. Even though the connectors themselves are rated for 50 amp, I'm wondering if the different size tabs are intended to prevent a connector wired with smaller gauge wire from mating with the connector capable of taking the full 50 amps with 2 or 4 gauge cable. This might be a stretch! It would be entirely up to the person assembling the contacts/wire to ensure they use the appropriately sized "tab"... Because the contacts themselves, regardless of wire diameter, will fit into any of the connector bodies. If this is not the purpose of various size tabs, I don't know what it would be. But for me it turned out to be inconvenient, not to mention I can't find the real purpose.
Tiffany
Reviewed in the United States on October 10, 2019
Works but fits tough
Recommended Products