Your cart is empty.
Your cart is empty.Product Description
Compact Design Hydronic Heater Assembly
Product description
Heater consists of a 12v DC permanent magnet motor, coil, plastic centrifugal wheels and housing. The plastic parts are Polypropylene. The heater is a 3 speed unit, requiring connection of 3 wires and coolant supply input and output hoses. Each lateral side has an air inlet. The front has 4 air outle.
Operating principle
Vehicle engine coolant runs through the coil. At the same time, the blower unit blows fresh air through the heat exchanger, elevating the air temperature, which then exits through the outlet louvers.
Operating conditions:
Heater must be located to receive fresh air.
Operating temperature between -13°F and +176°F.Cooling fluid must be antifreeze and anticorrosive for copper and aluminum.
Safety Instructions
Switch off electric power supply before working on the product.
The product must operate in an environment protected against liquid splashes (water…).
Be careful, while servicing the device or its connections,wait for the complete cooling of the device and its connections
Do not touch the heat exchanger and its connections when coolant is flowing through the heat exchanger
Features
- Hydronic Heater
- 12 V, 3-Speed
- Dual Scroll Blower
- Just the right size for small cabs.
- Under Dash Mounting
- 80 CFM Air Flow
- Front panel with 4 Vents
- Includes Mounting Bracket
Compact design
Heater Compact design, excellent for small cabs
Dimensions: 10.5 inch x 9.5 inch x 5 inch
Material: Copper, Iron. Instructions is Included
Easy to install
connect plumbing and wiring directly to your cooling system for immediate heat.
energy-saving and power-saving, and low noise. Low power consumption, high thermal efficiency, does not affect the power of the original vehicle.
Dual blower & Front 4 Vents
The blower unit blows fresh air through the heat exchanger, elevating the air temperature, which then exits through the Vents adding strong and consistent heat to any vehicle.
Durable tube/fin core design
Vehicle engine coolant runs through the core. At the same time, the blower unit blows fresh air through the
heat exchanger, elevating the air temperature, which then exits through the vents
3-Speed Switch
Switch assembled, ready to use.
Safety
The power supply of the Heater was protected by a specifically dedicated fuse.
Alicia
Reviewed in the United States on January 29, 2025
It’s good but doesn’t blow out a lot of hot air
JEREMY
Reviewed in the United States on January 29, 2025
This heater works very well in my non heated skid loader. I added a plexiglass door, side panels, and rear glass on my old case skidloader. Decided to give this heater a try and I couldn't be more thrilled with how it works. Only challenging part was figuring out where to hook up in the engine but the T fittings that came with it helped and only slight modifications. Would definitely recommend this heater to others with similar situations.
amazon customer
Reviewed in Canada on January 25, 2025
very nice heater assembly; it has a dual squirrel cage fan as well. Would have been nice if they included the trunks to connect to the outlet ports . Have to buy those separate!
Keven
Reviewed in Canada on April 5, 2025
Once i plugged it, the fan started smell like burned and it never worked correctly
Willy
Reviewed in Canada on March 5, 2024
Installed this in a 34 foot bayliner cruiser boat, works very well ,
Curtis wells
Reviewed in Canada on November 8, 2024
Works great my only issue was that the packaging could have been better as one of the pipes was bent and housing as will that the only reason for the 3 stars but over all I got it straighten out and Works fine in my sxs
Matt
Reviewed in Canada on November 28, 2024
Decent little unit for the price.
LaNell Scott
Reviewed in the United States on October 15, 2024
Heater works great and fit perfectly above passenger footwell. Enough heat for defrost and both driver and passenger.
michael
Reviewed in the United States on January 1, 2024
Really easy to install, puts out good heat and low voltage draw
Dan - Customer
Reviewed in the United States on February 1, 2023
Lost a star as soon as I opened the boxAs pictured, the mounting brackets for mounting the heater are on the bottom of the side panels. If you hang the heater using the supplied brackets, the coolant lines will be on the LEFT. This heater was chosen because the lines were supposed to be on the right side for my application.
Customer
Reviewed in the United States on December 15, 2023
Worked very good in a 2010 polaris rzr
Scott
Reviewed in the United States on October 12, 2023
No complaints installed in my equinox instead of replacing the blower motor and leaking heater core for the winter beater. Hasn't been cold enough yet to tell how well it really works but driving with the windows down in 50 degree weather at night it was warm and definitely hot holding hand in front of vents. Worth 80 bucks no smell.
RacerX
Reviewed in the United States on December 26, 2021
Instructions say 25% reduction in heat output if you connect them backwards, but nowhere does it indicate which is inlet and which is outlet. Will up the stars if manufacturer can answer this, otherwise guess I'll have to try both ways and compare, which is a pita.
Recommended Products
$426.20
$ 99 .00 $99.00