Your cart is empty.
Your cart is empty.Product Description
30 Position 24Amp/400V Screw Terminal Block Distribution Module (Screw Mount)
- Screw Mount 24A/400V 30 Position Screw Terminal Block Distribution Module.
- Terminal Block: Pitch 5.0mm/0.197", Strip length 7mm. Screws - M3,steel,Cr3+ Zn plated. Pin header and Cage - Brass.
- Wire range 26AWG ~ 12AWG / 2.5mm square. Rated voltage 400V, rated current 24Amp(per position).
- Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included are two M3 x 10mm wood screws, you can easily mount it on a wooden board.
- External dimensions: L175mm x W48mm x H33.1mm / 6.89" x 1.89" x 1.30"
Bill MacCracken
Reviewed in the United States on January 1, 2024
I needed to splice a 30 wire cable and this provided a robust and simple solution
Nathan McCann
Reviewed in the United States on October 22, 2023
You can remove the board from the rail mount and use screws, worked great for all the inputs/outputs on my arduino project.
Mike M
Reviewed in the United States on June 10, 2021
Used to buy the individual terminals, but these are way more convenient, cost less and look cleaner in the installation in my opinion. Would like to be able to jump terminals with a cap. Not sure if that is a feature this design has and they don't provide the jumpers, or if this isn't possible at all with this block aside from using wires to jump at the terminals. Would be much more useful with top mount jumper strips, only reason for 4 stars. If that's a feature and someone corrects me, I'll bump up to 5 stars.Way better build quality than others I've seen. Pretty close to the same as what came in some of my high end industrial cabinet shop equipment.
R Shoets
Reviewed in the United States on March 4, 2021
Great board. Does exactly what I needed. Will be ordering more.
Lloyd
Reviewed in the United States on February 25, 2021
This product worked great for my purpose. I wanted a way to connect many alarm wires that were coming into a metal enclosure that would look clean and be easy to work on if needed later. This did the trick for me.
Len Castelli
Reviewed in the United States on February 18, 2021
Used to collect and organize connections of low-voltage wiring in complex model railroad layout.
Carl M.
Reviewed in the United States on January 3, 2021
This is a very well built block. I used it to terminate five six conductor runs and 20 g solid core wire and it performed flawlessly.On the other side of the block I doubled up two 16g wires as a jumper and that was doable but a little tight.
Mike
Reviewed in the United States on April 24, 2021
Made very well. Quality seems good I would buy again.
Recommended Products