Your cart is empty.
Your cart is empty.Product Description
Assemble the lock cylinder match your old keys--L/R Door Lock Cylinder Recode Rekey To Match Your Current Old Existing Key Fits Honda 98-02 Accord
(Note: Please check if the each pack is completed as above shows, there are 8 types of plates provided, but they are not all required in installing, just check which type fits your old key, and use which one. You may only need 8 pieces of them.)
Before beginning, prepare a needle-nosed plier, preferably with a pair of tweezers or clips, and some grease is better.
Note:
Picture 8: Stuck one side to Point B. Use pliers to clamp A&B points, push the white plastic will rotate. Then, press it from point C by hand so that the other end stuck.
Picture 9:
- Put the green plastic and outer key cover on the rock plate.
- Then put them on the tumbler, the plastic part should be on the opposite side to the shell.
- Last put the C-Clip on locks it like picture shows.
Tips: (How to select the suitable plate for your lock)
There are 2 ways to figure it out:
- Uninstall your old cylinder step by step and record each plate in each slot position, and copy them in new cylinder.G
- uess the code by your old key tooth and try it at each slot.
See above Picture 13, there are 5 vertical lines ( line1-5) in above picture , 2 horizontal lines (D/d) mean the distance from the key tooth to the edge of the key. You need to get the right distance to choose the lock plates. For example: the distance from the up tooth to the line2 position is dline2 , down is Dline2, and so on...
3. Here is how to use distance to select lock plates:
- If D/dline2-5=0.9mm, Use half lock plate=X1;
- If D/dline2-5=1.4mm, Use half lock plate=X2;
- If D/dline2-5=1.8mm, Use half lock plate=X3;
- If D/dline2-5=2.1mm, Use half lock plate=X4;
- If D/dline2-5=2.5mm, Use half lock plate=X5;
- If D/dline2-5=2.7mm, Use half lock plate=X6;
- If Dline1=1.7mm, Use full lock plate=X1;
- If Dline1=2.5mm, Use full lock plate=X2.
********** The above data is measured by hand and there will be a little error. The main function of these data is to determine which plate should be used for the corresponding hole. ******
If any questions with installation, please feel free to let us know. We are pleased to provide more details!
Sruli s.
Reviewed in the United States on March 24, 2025
It's extremely difficult to asembly do not buy if your not a locksmith also the spring kept braking
JThor
Reviewed in the United States on February 28, 2025
Need some QC. The one I got both the tumbler I had to file some area down so the tumbler can turn in the shell. Some the slot for the lock plate was to tight and needed to file so the lock plate can slide smoothly. After I got all that done it was easy to put together. Just make sure to have some tape and some small files if needed.
Narada Boney
Reviewed in the United States on April 3, 2025
Fast shipping and great product
Paul
Reviewed in the United States on June 21, 2024
I was going to give this a try, it was easy to assemble I would say that. However the tumbler is not cut properly as you can see in my photo when I was putting in the plates I had to press down on them because it had metal in the way. I was going to finish up the passenger side and the keyhole will NOT fit in the tumbler. Somehow the tumbler keyhole is either too small, or the keyhole is too big, no matter how hard I tried to press it down, it wouldn’t fit. Also the inner key over gets in the way, as you can see after inserting the key it will not properly close the hole, it stays open.
Samir Atoui
Reviewed in Canada on January 25, 2024
thank you
Ivan T.
Reviewed in Mexico on May 15, 2023
Todo funciona bien y se ve fabricado de buena calidad
MistyMM77
Reviewed in the United States on January 18, 2023
My son just bought his first car - a 2003 civic. The key cylinder was totally missing and we found this kit so we thought we would give it a try. It took us about two hours to decode the key and code the cylinder for his existing key. It wouldn't have taken as long if we had started out using masking tape to tape down each piece as we went - trust me you want to do this. Start from the far end and work your way to the key hole, don't try to do all the D first then all the d next or you will end up having it all fall out and you have to start over lol. Write down your code as you go in case you need it again.The kit comes with all the pieces but I recommend you have a pick, masking tape, tweezers, and silicone lubricant too. The kit has both drivers and passengers side which was a nice surprise to us.My son and I had a somewhat fun bonding time putting together the puzzle and now that it's done he can't wait to install it in his car door!UPDATE: not sure if it is this after market cylinder or the after market door handle we bought to replace the broken door handle BUT it took a large amount of force to fit the cylinder into it's place on the door handle. My son (who lifts weights and is very strong) managed to press it in between his two hands but it took all of his force and he was afraid he might break the handle. There is NO WAY you can install this cylinder into the after market door handle if the door handle is already installed in the car, at least not in our experience. No idea if this would be different with an OEM door handle. Once it was installed we are very happy with it, it works perfectly with the original key.
Agustín
Reviewed in Mexico on March 16, 2022
Fácil de configurarKit completo para configurar cualquier llave civic 2005
C S
Reviewed in the United States on October 4, 2022
Never installed but was able to figure out my key code by trial and error. Worked well with my key
hpo
Reviewed in the United States on January 6, 2022
My Honda Odyssey suffered from a common Honda problem of key getting stuck or not working in ignition.Although this kit is for the door locks it uses the same wafer tumblers as the ignition switch.Wafers are coded so just replace old ones, that will probably be bent or broken, with the new ones in this kit and you're good to go.There are good videos on YouTube showing how to remove the lock which are a great help.The job is a bit fiddly so not for the faint of heart but will save you hundreds of dollars.
Kindle Customer56
Reviewed in the United States on January 13, 2022
Kit is missing the Y4 and Y3 pins. These are the round single pins that go into slot A. Not essential because to be honest if you are doing this you have an old car worth nothing and can just skip the pins.I bought this because I needed it quicker then directly from china and I was concerned that the core and other non pin parts of the original locks would need to replaced once I got the locks apart.Little to no use of the spare blank because again who is going to bother spending money getting a key cut when DIYing this.
Recommended Products