Your cart is empty.
Your cart is empty.Product Description
High Performance 4 Inch Diamond Polishing Pad
Easy Installation
Wet/Dry Polishing
-
Remove Heavy Scratches
- Recommended RPM:1500-2500RPM
- Recommended Water Use:Dry Polising Or With Small Water
-
Achieve Shiny Finish
- Recommended RPM:3000-3500RPM To Avoid Burning The Stone Surface
- Recommended Water Use:Add More Water
-
Fine Polishing
Recommended Water Use:Dry Polising Or With Small Water
Polishing Pad Has High Polishing Speed & Improves Your Work Efficiency
Tips:Do not use with high-speed grinder.Please follow the recommended speed and use it below 5000 rpm to avoid potential damage to the surface.
4 Inch Diamond Polishing Pad Is Suitable For Most Stone Surfaces
Rishard Craddock
Reviewed in Canada on January 31, 2025
Works well the 30 grit to start with does go fast . But I will buy again and I think their worth the price. Turned a beach rock to a surprise finish
William
Reviewed in the United States on September 28, 2024
Every pad is dimond embedded unlike other company's where it's hit and miss. I'll be ordering from this company again 👍 good job guys 👌
Claude Vachon
Reviewed in Canada on August 24, 2024
Nice product
Brian
Reviewed in the United States on November 2, 2024
Ive been using the cheap scotch like pads for years. These things are a total game changer. Has all the grits and they just work without wearing out in a few minutes. In fact ive been using them regularly for a month now and none of them have worn out. Just get them.
Robert
Reviewed in the United States on November 17, 2024
I’m new to polishing rockThese beauties do wellSlower speeds seem to work bestTake your time wear gloves and eye protectionPPE is most important
Carlos Martins
Reviewed in the United States on November 17, 2024
The wheels vary, but it did the job. Having a variable polisher makes a difference
For Serious
Reviewed in the United States on October 28, 2024
My qualifications for this review are that I carve various rocks into simple shapes—like squares. I've been polishing my carvings with hand drill risen diamond polishing pads. That's what I'm comparing these pads to.After setting up my bench grinder to use these pads, I did a run with a bunch of rocks using all the grits. In that bunch there was glass, moss agate, lace agate, and two other types of rocks that I have not identified.Honestly, 15 grits is a lot to go through. Probably too much. You'd probably be fine skipping every other. However, the main problem I was having with the hand drill sets, is getting the grooves from the electroplated diamond grinding passes polished out. Without going into much detail, this new set is able to polish out the rough face left from an 80 grit electroplated disc. That's something that was totally impossible with my older sets. I needed to go up to 600 grit, and even then it was easy for me to miss spots. These pads make things much easier by not needing to be wet. They'll probably ware out faster if ran dry, but I don't worry as much when the water runs out on the current face.Of all those rocks I did, the agates came out the best. I learned a few things while doing this, so the next rock I do should be better. Either way, I'm not worried about being able to make them all into total mirror polishes now. That's going to be easy. The agates and glass are mostly already there. I think I know what I did wrong on the other rocks.Some things to keep in mind. Even though the lowest grit in the set is 30, it won't do a good job of carving bumps out or leveling a surface flat. You should use hard diamonds grinders for that. These have a nice thick coating. It should last quite a long time—More if you can use it wet, and even more if you don't use every grit each time. I wouldn't be surprised if the Velcro back dies first.For the price, I think these are a really good deal.I think my only complaint is that some of the pads feel more flat than others. That could be from me putting them on inconsistently though.
Tony Morales
Reviewed in the United States on October 26, 2024
Not had time to try them all, but the ine use in concrete, just to buff off some imperfection did a marginal job and it is almost gone. Perhaps not goofs for this application but sine it doesn't cone with any instructions of possible applications, it might not be recommended for abrasive tough surfaces. Should include in packages where it may be used.
Milo
Reviewed in the United States on October 22, 2024
First, the polishing pads are printed with the grit, so it's easy to identify what they are. They're also color coded, though there doesn't seem to be any rhyme or reason to it. I had a marble (I think) top shelving unit, and needed to get some light scratches out. This made it easy to cycle through the grits, and remove said scratches. Note that they want you to use this below 5,000 RPM, so be sure that you don't exceed it. I'm not clear with what happens if you do, but it doesn't sound like it's a good idea. You will need a backer pad, because they don't include one. I wish they did so you had an all in one solution, but it's not a big deal for me, I have some on hand. I'm not familiar with the brand, but they seem as good as any others that I've used.
daisy lani
Reviewed in the United States on October 22, 2024
The listing says maximum RMP of 5000, my grinder is over that, even the small 12v grinder low setting is 10,000 rpm so out of caution I did not use a grinder as they have pictured. I used a cordless drill with a speed of 2000 rpm which I felt more safe using. These pads are small (4") so it was no issue and the drill did not bog down and was easy to control. Its nice that you can feather the speed to get good control. The wide range of grits were useful for work your way up to get a smooth finish. knocked out scratches and irregularities much faster then trying to hand polish the surface. This would be good for small touch ups, don't know about a large surface as it would take a long time for for small repairs and touchups it worked great. can't beat the price, for what you're getting. Don't know how long it will last for for small one off jobs this is a good set.
Recommended Products