Your cart is empty.
Your cart is empty.BUSHFACE
Reviewed in the United States on March 26, 2025
These are just like what we used in high end dining tables. I use the for solid wood top so the wood will not buckle or split. Worked as a senior product engineer for high end furniture companies.
David Lambert
Reviewed in the United States on April 1, 2024
I used these to mount 1-1/2 inch thick foam to my garage door. Have a uninsulation garage. So used these mount to insulate the garage door. These work perfectly with the 1- 1/2 inch foam .
T. Hanson
Reviewed in the United States on January 9, 2023
I use these on all my woodworking projects that have some sort of top that gets stressed. End tables, coffee tables, benches, etc. Very sturdy and allow for seasonal movement of wood.Note: these are not necessary if using plywood. Plywood doesn't really move with the seasons, but for solid wood, you don't want to secure the top on with a fixed fastener like screws.
chuck hulet
Reviewed in the United States on January 8, 2023
THESE TAKE A LITTLE EFFORT TO INSTALL. I USE A SLOT CUTTER (BISKET CUTTER) ON A THE FRAME OR CABINET WALLS TO CUT A FEW SLOTS FOR THESE BRACKETS TO RIDE IN. THESE ALLOW THE TOP TO MOVE IN ANY DIRECTION THAT ALLOWS FOR EXPANSION AND CONTRACTION THAT HAPPENS WITH CHANGE IN TEMPERATURE AND/OR HUMIDITY. FOR SOLID WOOD CONSTRUCTION, IT'S THE BEST. AND SINCE ITS SO QUICK AND EASY, ITS GREAT EVE FOR PLYWOOD. NOT SURE ABOUT MDF OR OTHER COMPOSITS.
Flojos
Reviewed in the United States on December 1, 2022
I used the Rok Hardware 14 Gauge Table Top Fasteners to attach the top to a coffee table I made and the fasteners worked exactly as advertised. I used a biscuit a joiner to cut grooves for the fasteners (there are a bunch of YouTube videos out there on how to do this.) My only complaint is the screws that came with the fasteners are pretty much junk. The screws were way too short for my application so I bought new ones. That said, the fasteners are still a great deal and I definitely recommend.The table top I made ended up warping a bit, but that's on me and not on the fasteners!
SF
Reviewed in Australia on July 24, 2021
First time trying these Table Top Fasteners and absolutely loved it! Highly recommend the product and its super sturdy and very cost effective
lineman
Reviewed in Canada on November 29, 2021
Product was as advertised and good quality.
Cody & Bridget Russell
Reviewed in Canada on January 12, 2021
Bought these to fasten down a table top of a table I built. I used a biscuit joiner to make the slots for them and they worked perfectly.
Scott
Reviewed in the United States on November 20, 2020
First thing. For those who said these aren’t true or square, they’re supposed to be that way! That little bit of offset in these is what creates the clamping pressure to hold two pieces together, like an apron to a table top. That’s also why there is the stamped reinforcement in the bend of these, to prevent that angle from changing.As far as quality and use, these are perfect. Very sturdy and consistent across all clips and a great value for the money with the included screws.I recently built a walnut kitchen table and used these to mount the top to the apron I built. I used a scrap piece of wood and a clip to get the depth and height right for the groove to rest in. Extremely easy and great screws. I didn’t have any screws strip or slip etc...When using these, it’s ok to fully seat the clips at the end of the table and middle supports as the wood will expand left to right. However, for the clips running along the side, make sure you don’t fully seat the clip in the groove or there won’t be room for expansion. Pull it out about halfway, drill a pilot hole and then screw in.
Brent Wake
Reviewed in Canada on May 10, 2019
Product work very well, made assembly easy
Hank
Reviewed in the United States on March 20, 2019
I use these to fasten table top to frame, and it works just great. I cut the slots in the frame with my biscuit joiner, and this method works fine for me. I allow roughly 1/16" lower for my slots, that way the top will pull down to the frame for a tighter fit. This method for table top attachment goes really fast, and accurate, that is if you make sure the slots are cut right. I tested for slot positioning by attaching two boards together with a couple of these fasteners, and measued how far down the slot is, to make sure my slots were cut in the proper place. I don't use the screws that come with the fasteners, as they are too short. I received these fasteners in time promised.
Gregg Stemmann
Reviewed in Canada on December 13, 2019
They arrived quickly and came exactly as advertised they work great
Theodore
Reviewed in the United States on June 5, 2018
Ordered them and they arrived on time in good condition and I found them to be as described. I used them to fasten the top of a small table to the base. They were easy to use and did the job well. I had not used them before and wasn't really sure how to so I searched You Tube and watched a couple of videos on different ways to install them and it was easy. Good product and reasonable price. Amazon service - as good as expected.
Recommended Products