Your cart is empty.
Your cart is empty. Installation steps:
1. Ensure safety: Before starting, make sure the unit is turned off and disconnect the spark plug to prevent accidental starting.
2. Locate and remove the old starter: Identify the existing pull starter on the unit, remove any screws or bolts securing the old starter, and carefully remove it from the engine.
3. Prepare the new recoil pull starter: Make sure the replacement starter is free of any packaging or debris, and confirm that all components are in good condition.
4. Install the new starter: Align the new recoil pull starter with the mounting point on the engine and secure it in place using the appropriate screws or bolts.
5. Test and adjust: After installation, gently pull on the starter to ensure it engages smoothly. If necessary, adjust the tension to achieve the desired resistance.
DS
Reviewed in the United States on February 7, 2025
This recoil starter is advertised as being able to fit the Stihl BR430 leaf blower - but it doesn’t.The attachment screw openings don’t match the blower plus the opening for a portion of the starter mechanism is on the wrong side of the recoil housing. (See photo)The clutch itself looks to be adequate for the job so it would likely work on a different Stihl just not this model.
Kent J.
Reviewed in the United States on September 18, 2024
This item was compatible with my Stihl BR430 even it was advertised as such. Had to return the item.
Rich P
Reviewed in the United States on November 19, 2024
Will not fit a Stihl BR-450 blower. Cut out is in the wrong location.
Recommended Products
