Your cart is empty.
Your cart is empty.
✧ Material: ABS plastic
✧ Color: Gloss Black
✧ Holes pre-drilled (not include bolts)
✧ 5 inch Stretched, easy installation
✧ Direct replacment to stock Rear fender extension
🔻 Fitment:
✅ Suits for 2014-later Harley Touring Street Glide Road Glide models with rear fenders equipped with tri-bar lights. (Owners of models without a factory-installed Tri-bar taillight, should purchase one for proper fitment)
❎ Attention: Ultra and Road King models are not a direct fit.You will need to remove of tip end light and blocked holes are required.
🔻 Package included:
✧ 1 * Rear Fender Extension
🔻 NOTE:
✧ 1. Installation manual is not included.Please read all description & fitment before ordering the product.
✧ 2. Kindly consider to have profession install the product to avoid mistake caused by inexperienced installation.
Gavin Kannenberg
Reviewed in the United States on March 2, 2025
Part looks of good quality! Paint looks pretty good for being black. A few little imperfections but barely noticeable. Upon install the light doesn’t fit exactly right but doesn’t bother me. And then I had issues with the one hole lining up correctly so I filed it just alittle bit to fit and worked. You get what you pay for, I think it was a great buy though!
kylejhill
Reviewed in the United States on February 1, 2025
I needed a fender extension after I got the extended bags to line everything up, but I didn't want to pay the prices of the name brands. This extension works just as good for a much lower price.
Tameka Harrison
Reviewed in the United States on September 1, 2024
I bought this for a friend bike and it fit perfect
Rick Williams
Reviewed in the United States on July 4, 2024
I attempted to install the Fender extension, but it doesn't fit on my 2022 Road Glide Limited. Can I get contact information for the vendor?
Scott Johnson
Reviewed in the United States on May 1, 2024
Arrived sooner than Amazon said. I have a vivid black 2014 Street Glide Special project Rushmore and it fit like a glove. Closed the gap between my original fascia and 5 inch drop saddlebags....covering the brackets and hardware that you could originally see with the old one.In my opinion the thickness of the plastic was just right.....not thin at all and did not "feel cheap".Install notes:1) The old one came off very easily as it was thinner. To install this one, I had to remove the turn signal lights mounting bracket. The sides of the new fascia are wider (as that is what helps close the gap between the fender and the saddlebags). Didn't want to crack the new one trying to get it flex around the turn signals.2) As stated in other reviews, the factory led tailight/brakelight assembly that mounts to the bottom of the fascia took some small modifications to make it fit perfectly, but was able to add 3 small (#10) stainless steel washers under the 2 screw hole tabs that hold the light assembly in and it worked just fine. The tailight has 2 screws at the top and two plastic tabs at the bottom of the light that hold the assembly to the fascia. At the top of the light assembly where the screws go wouldn't completely come down far enough to meet up with the holes in the fascia. I was afraid that if I forced the screws in it would break the screw tabs....so I placed the three stainless steel small #10 flat washers between the tailight screw tabs and the holes in the fascia where to take up that gap. As stated, worked great.Very happy this worked out great and looks great for the money I saved vs. buying the OEM fascia, would for SURE recommend this CVO style fascia and would buy it again.
N. Jones
Reviewed in the United States on March 20, 2024
I will add photo later.. First off there are good and bad to this. Good The fit is tight, finish is clean, and no issues on install if you take your time and lastly it's thick made of high grade abs plastic. On to the bad paint match is good but not perfect as someone else mentioned it's a couple shades off vivid black and has a slight brown tent in good light at close inspection a few feet away and I couldn't tell, where the antenna cutout is stamped into it on the inside they pressed to much so you can see the oval impression on the surface but the taillight covers that area so not a big deal, and last it scratches easily but a little polish should take them out. Over all it's well worth the money if you don't mind the small defects over the other more expensive options. The look upgrade to the exhaust area is really nice I do not resent th÷ purchase in the slightest.
Amber D.
Reviewed in the United States on April 27, 2024
The paint looks fine and the fit is good. No issues installing and it looks great. I put it on a 22 road glide ST.
Zombie
Reviewed in the United States on February 5, 2023
This thing is cheap and thin. Paint looks good but the tri bar light doesn’t fit in the cutouts. When I tightened the 2 screws for the light, it spidered the plastic / paint. I thought what the hell, I will try and install anyway. When I went to put it on the fender and slip it over the top studs, it broke in 2 pieces. I can’t recommend this to anybody. Sometimes you really do get what you pay for
tremblay
Reviewed in Canada on June 21, 2022
Fabrication de piètre qualité ces la première fois que je me fais avoir 🤬🤬🤬
Recommended Products
