John Arseneau
Reviewed in the United States on March 18, 2024
this should make things easy to connect our nail guns
Gary Hotte
Reviewed in Canada on August 27, 2023
It will do the job OK but leaks air badly at swivel inlet fitting.I would return it except for the time and effort to dismantle and package and return/ship item..
Joel
Reviewed in the United States on October 7, 2023
The functionality for the future looks bright…with just a few changes. I changed the hose to a 1/4” 100’ air hose and had to reverse all the fittings and did a 3/8 to 1/4” hose connection. As it was it felt completely backwards to me so after to modifications and knuckle scraping, I get to leave the compressor outside or in the vehicle. Once the changes were made and after a bit of use I see my self holding on to this for a long time. Be warned though. At the end it’ll be close to like $230.
jim mccoy
Reviewed in the United States on July 26, 2021
Great product. Easy install
Flyinglow
Reviewed in the United States on September 6, 2020
Price is reasonable and seems sturdy enough given its price. I actually have 150 ft of hose and was surprised to find that, if I wound it on carefully, this would just barely hold all of it. The arms holding the hose could be longer but they suffice for 100 ft of hose as advertised.Quality; One of the arms was slightly twisted but not enough to be a significant issue. The spring tension that is intended to keep it from unspooling could be higher. I have mine mounted fairly high (at about 5 ft from the floor) and it works fine until there are maybe 2 1/2 feet of hose, with air nozzle, hanging from it...at which point it will unspool on its own until the hose reaches the floor. You need to keep the hose wound all the way on when stored.Other: I found it odd that they provided a 90 degree air line fitting with no explanation as to its purpose. It actually isn't needed since the hose on the spool can screw directly into the fitting on the inside of the axle. Instead, you will need a straight quick change male/male fitting to screw into the end of the axle to attach the hose from your air source (not provided).
Rodney J Schmidt
Reviewed in the United States on September 26, 2020
good job!
William P.
Reviewed in the United States on November 3, 2019
Could have been a little bit heavier made
Bigbellied1
Reviewed in the United States on January 22, 2018
ALOT SMALLER THEN IT LOOKS! That was my first disappointment. It’s made to work backwards from what I thought. It’s made to plug in with the hose and then carry the whole unit away from the compressor, then attach your air tools to the side double connectors. I had a 25 ft hose so I redid the hose connector on the unit to accept my tools and ran my 25 ft hose(only really need about 5ft of hose) between the compressor and one of the double connectors on the side of the unit. It works fine this way. Just didn’t expect to have to modify it. Who wants to carry the whole unit out to your car to put air in a tire. Now after modified I can just grab the hose and go, then real it back in.
Mr. Sam
Reviewed in the United States on November 1, 2014
O yes the second I started using this product hand rolling air hose went out the window A MUST, Don't have one, Get one Super great.