Your cart is empty.
Your cart is empty.Product Description
Antenna Mount Outdoor Antenna Pole Mast Mount Bracket- Heavy Duty Steel with U-Bracket Assembly + 6 Screws
Upgraded Design:
- Superior Performance,Heavy duty Steel mount with ridges that allow for a tighter grip, 4 strenghtened ribs(spot weld reinforcement)at right angles offer increased rigidity
- Easy Installation,Can be mounted vertically or horizontally
- Item Dimensions : 6.3-Inch L x 3.15-Inch W x 3.15-Inch H
- Heavy-duty steel, larger in size, heavier and more durable
Outdoor antenna mounts allow for easy and optimized installation of an outdoor antenna on a roof or wherever outside signal is stronger
- Q: What is the largest diameter pole this antenna mast mount accommodates? A: Mount for Antenna Masts up to 2in /(5.08cm) Outside Diameter
- Q: What is the offset dimension? A: The off set dimension from the wall is about 3.15in /(8cm)
- Q:What’s the smallest Outside Diameter pipe this pole mount will accommodate? A: Theｍinimum 1.2in /(3.04cm)
MichiganRKV22
Reviewed in the United States on February 8, 2025
When supporting a mast by a bracket attached to the fascia board, the offset provided by this unit is absolutely necessary! Works great. Also, it's a very strong bracket.
Cheryl L. Koehler
Reviewed in the United States on February 16, 2025
Perfect for antenna mast to facia fastening!
Daniel
Reviewed in the United States on January 22, 2025
Really depends on the length of mast and device weight you are supporting, but I have a 4’ Sch80 pipe holding my Tempest device with this mount without issue. It certainly worked well for me
Fred Molesworth
Reviewed in the United States on September 7, 2024
I wanted something very solid so I could string a ham radio dipole antenna between the two ends of my house. After looking at the choices, I chose these, and I'm not disappointed. They are built with a thick steel, seem to be well coated, and because of the two-piece construction, are easy to install.The U-bolts, which seem to be stainless, come with both regular and locking nuts. Be aware that the hardwar is metric. I mounted the devices with the provided screws put directly into my eaves, and didn't use the provided inserts. In retrospect, I'd rather have a bolt that could be used with a socket and ratchet than the phillips-head screws provided since they'd be easier to put in.Overall, my project didn't work as I wanted because the balun in the center of the antenna was too heavy to be properly supported by my eaves. But these mounting brackets were a great choice and I will use them for mounting other antennas such as a vhf/uhf vertical (or ludite that I am, a tv antenna since I've abandoned cable and gone to a Tablo for my television). They'll work very well for these purposes.
Kindle Customer
Reviewed in the United States on August 30, 2024
Item was delivered next day. Hung an antenna and it seems very secure. Price was great and came with the all the necessary screws and bolts to attach it.
TGlenn
Reviewed in the United States on February 22, 2024
Overall, I'm very impressed with this mounting bracket. It's solid and sturdy.The only thing I found kind of not so good was that I had some difficulty with gettingthe nuts to thread onto the u-bolts. It's all fine now. I trust it will hold up well.I probably won't buy these anymore though, mostly because it seems like a lot of the nutsthey provide do NOT screw unto the threaded parts of the u-bolts.I don't know if the u-bolts are the problem, or if the nuts are the problem. But I'm fed upscrounging through my own stuff to find parts that will work. Especially since theseclamps are not exactly cheap.
Kevin
Reviewed in the United States on December 30, 2024
Not a terrible kit, but needs either guy wires or a second bracket to get a sturdy mounting solution for any antenna mast. I have a Tempest weather station atop a 10ft fence top rail and it sways even with a 3-5mph wind.Update- Much sturdier with a second bracket. However, when trying to loosen the nuts, they became crossthreaded. Replaced the cheap Chinese junk with Hillman 1/4-in 1/4-in x 3-1/2-in Stainless U-bolts from Lowes. They are a snug fit through the holes, but they fit without modification. Factor in an additional $10-15 per bracket for the upgraded hardware.
David L.
Reviewed in the United States on September 11, 2023
It comes with just about everything you need to git er done. Love how strong they are and easy to install. Had it up in less than 45 minutes. That's with installing the 2 inch pipe. The reason I gave it 4 stars instead of 5 is because it says it will handle upto a 2 inch pipe. Yes, it fit.... kinda... I had to force it into the U bracket and use a large Chanel locks to squeeze them together to get the U bracket to go through the holes. It's not an easy thing to do by yourself. If I'd used a smaller pipe, I'm sure installation would have been much easier. Overall, I'd buy them again. In fact I am buying them again for my girlfriends place.
Recommended Products
$42.99
$ 22 .99 $22.99
$35.99
$ 18 .99 $18.99
$16.99
$ 8 .99 $8.99