Your cart is empty.
Your cart is empty.Product Description
The Bergeron’s
Reviewed in the United States on January 27, 2024
The threaded bung that threads into the valve on the bottle is the incorrect size. Super loose and sloppy, will strip the bottle valve as the threads don’t engage properly. Needed to use it for a purge project so couldn’t wait for a replacement, ended up taking the bung off of another regulator to make it work.
Dillon Dorsey
Reviewed in the United States on September 25, 2023
Works as described right out the box. No leaks for me. Now I can back purge and weld with the same Argon bottle.
FlyBoyMark
Reviewed in the United States on November 29, 2023
The CGA 580 gland should actually be at least an inch or two longer. Gas hoses press against side of gas bottle and make connecting difficult. Otherwise works fine as advertised.
Jon B
Reviewed in the United States on June 5, 2022
Great bang for the buck. Attached to my 100% argon tank so I could have a feed to my welder AND a separate line for back purging. Combination of 1/4" ID nipple or the usual 5/8 UNF - 18 flare fitting for a gas hose was quite useful, as I needed one of each. Pretty easy to get a stable, accurate flow reading from the adjusting knob.Lots of comments about leaks, but if you buy it with free returns, then why not take a chance and see if it works for your application, and you can just send it back if not?
Jessica A Beem
Reviewed in the United States on February 20, 2022
EVERY single place it can leak it does. After I inadvertently left the tank valve on it emptied a nearly full argon tank. I checked it with soapy water and bubbles everywhere. Disassembled and used loctite red on everything and “thought” it would be ok. It’s better but still leaks and once again I forgot to shut the tank off and it emptied another tank. $86 worth or argon gone. Should have bought a better regulator.
Ray Carino
Reviewed in the United States on December 10, 2022
The media could not be loaded.
Eng Abdullah S
Reviewed in Saudi Arabia on November 13, 2022
I totally do not recommend this item. Gives 700psi while it is still on the box. I tried it 2 on my bottle but still wrong gauge reading. Waste of time and money.
Jyreena
Reviewed in the United States on March 2, 2021
This regulator has great accuracy and works exactly as I needed it to. With the added convenience of ordering on Prime and the price being better than I could find locally, this was a total win.
AMarie Cantal
Reviewed in the United States on February 25, 2021
Great price and works as described. Using one port for back purge line and other port to my everlast 185
Recommended Products