Your cart is empty.
Your cart is empty.【Compatible with】: 1. 1/14 MOJAVE GROM MEGA 380 Brushed 4X4 Small Scale Desert Truck RTR; 2. 1/12 Losi NASCAR AWD RC Racecar; 3. 1/18 GRANITE GROM MEGA 380 Brushed 4X4 Monster Truck RTR; 4. TYPHON GROM MEGA 380 Brushed 4X4 Small Scale Buggy RTR.
nick
Reviewed in the United States on September 22, 2024
I bought these and I was quite skeptical about how they would mesh and hold up. So far so good. Multiple batteries through my grom and much abuse and they are still great
Nodnarb
Reviewed in the United States on September 15, 2024
my diffs arrived in pieces from the screws being so loose. figured perhaps this was an adjustment for the screws to tight complaints but turned out it was due to the poor machining and fitting of the parts so someone thought to not tighten anything and let it ship!! so the second problem was if you tightened the screws it would lock the differential and outputs would not turn.I ordered the 2 pack and of the 4 output cups two were machined or cast properly however the improperly machined bevel on the ring gears still would not allow it to be tightened...so I used the stock ring and it worked. I was able to make one differential work by combining parts from the stock diff but that's not going to happen with the second one as the remaining parts poor fitment will not allow it. so beware you may get lucky with these or you may not...also you can remove screws from stock diff and use them as much better quality and fit.
Sharon Woodford
Reviewed in the United States on September 11, 2024
JUNK LOOSE SCREWS POOR ASSEMBLY,, NOT WORTH THE $$MUST REBUILD OUT OF THE PACKAGE WITH GOOD FLUID AND SCREWS.
Brett
Reviewed in the United States on August 7, 2024
These come dry. So you’ll have to fill them. Best bet is to take the hubs out and fill and let gravity do the trick. You can’t get those tiny Philips off they will strip like mine. Once you do that you’ll be good to go.
Zach McNew
Reviewed in the United States on August 11, 2024
Cant get the screws out without stripping. They need to stop using Philips screws and use hex
Recommended Products
