Your cart is empty.
Your cart is empty.The Astro Pneumatic 7600 Hot Staple Gun Kit for Plastic Repair is designed for quick repair and reinforcing broken/ripped/damaged/split plastic on autos, motorcycles, ATVs, boats, etc. Its unique Staple Gun produces a strong durable repair by heating special designed staples and setting staples into plastic while still leaving plastic flexible enough for correct fit. This kit enables the user to repair plastic components such as bumpers, headlight fittings and assemblies, panel clips, tabs, plastic pins, spoilers, etc. It is easy to use, saves time and money and is CSA Approved with Patent Pending. The kit includes a Hot Staple Gun, Wire Cutter, Flip Screwdriver, 50pc each of "M”, "S”, "V” and "Z” Style Staples, Also Sold Separately: 7600M - 50pc "M” Style Staple for repairing outside corners, 7600S - 50pc "S” Style Staples for repairing flat plastic areas, 7600V - 50pc "V” Style Staples for repairing inside plastic corners, 7600Z - 50pc "Z” Style Staples for repairing flat plastic areas that need extra reinforcement.
Mark
Reviewed in the United States on December 25, 2024
Works great .only takes seconds to heat up and makes a solid fix. They offer a variety of staples
aaron lemieux
Reviewed in Canada on March 12, 2023
Works as intended so far, doesn't seem to be built super sturdy but works as expected, used a few times will have to see how long it works for for a 5star
James Brown
Reviewed in the United States on March 11, 2021
I've been trying to melt plastic together with a soldering iron for years with terrible results. The other option was to Frankenstein sew it with bailing wire.This is such an elegant solution. The first thing I tried it on was the high back of some cracked snowboard bindings.Next up... fixing my dirt bike and snowmobile plastics.
Rodger A
Reviewed in Canada on September 13, 2020
Seems great
hairy1xs
Reviewed in the United States on July 6, 2020
Saved me from having to replace a $400 headlight because the locating tabs were broken.4 clips were required to fully lock the two broken pieces together.Had tried multiple different types of glue nothing lasted.These worked perfectly
Ours family
Reviewed in Canada on June 23, 2020
Does the job ! What a good idea to create such tool. Just a note, I used it to fix a plastic boat (pedalo) in which I could not reach from inside, so it was slightly tricky to push the edge of the staples in the plastic to avoid sharp stuff on the surface. I used extra PVC to cover the patches.
tacomaman
Reviewed in the United States on October 24, 2019
Seems to be well made, definitely not cheap feeling. The amount and variety of staples are good, but it would be better if they were wider giving more strength to the repair. Comes with a set of dykes/snips for trimming the staple ends and a small 2in1 screwdriver. The heating elements of the gun cool quickly which is great. Followed the directions plus I like to give a small twist before I release the trigger. It's a good buy but on the pricey side
Dwight
Reviewed in Canada on January 23, 2019
This gun works great variable heat and easy to hang on to. Saved lots money not having replace things for a simple crack
Patti
Reviewed in the United States on August 17, 2018
Works as expected. Best if used on the back side so the staples are not visible. I have used it on a grille for a Cadillac SRX and a bumper. Both are still solid months later. Think of this as hot staples that melt the plastic to embed themselves.
Brent Short
Reviewed in the United States on May 11, 2018
Did a great job repairing the dash in my 2009 Silverado.These trucks are notorious for cracking in a small area near the passenger airbag, but mine was much worse. It was cracked in several places, including a crack all the way front-to-back across the dash, causing 1 side of the crack to sit about 1/4" higher than the other. It looked awful.I used this gun to secure the gaps, and used epoxy & some aluminum sticks to add extra support on the larger cracks. I don't know if the extra support was necessary, but it couldn't hurt. I can still see the crack if I look at the right angle, but it is barely noticeable & you can't even see it from most angles.Saved me hundreds vs replacing the dash (or more if I had someone do it for me). The work to get the dash out & back in was a pain, but the tool was great & easy to use.
Paul Kiley
Reviewed in the United States on July 25, 2016
I bought this for a very specific task: transplanting a headlight tab from a scrap non-HID headlight onto a factory HID headlight to repair it. Considering a new replacement headlight from a dealership is $1100, and even a good used one on eBay typically runs $600+, the cost of the tool seemed pretty negligible.The tab I was repairing Is one on two on the bottom of the headlight that accepts a bolt to attach the headlight to the radiator support. Clearly a simple glue joint was not going to do the job, and I was looking at plastic welders when I can across this tool and was intrigued.Long story short, ordered, and found it very simple (and even fun) to use this tool to attach the tab to the headlight bucket with about 8 staples embedded on various sides. I then reinforced the repair with a bit of adhesive for extra insurance, and that tab is now at least as strong as an undamaged one. As I said in the title, not something most home handymen will use every day, or probably even every month, but when the right task comes along, I don't think you can go wrong with this tool.
Das Vacuum
Reviewed in the United States on June 1, 2016
This is probably my favorite tool now, exceeded my expectations, I bought it because I had a huge Crack in my bumper it worked Perfectly. stapled it right back together. I own appliance repair store and was previously using plastic welder epoxy which was expensive, messy not great and would take 24 hours to completely dry. I was able to fix a 20 year old machine that had a crack in one of the parts that they do not make anymore, stapler worked great and fixed it no problem in seconds. The staples are thin but also strong so It fixes just about all cracked plastic. replacement staples are expensive tho
Ahmar
Reviewed in Canada on July 12, 2015
very nice machine.
Recommended Products
