Your cart is empty.
Your cart is empty.The Audio2000'S AMC4171 clips are 3-pack microphone universal/versatile microphone clips/microphone holders for most handheld microphones. Configured with a flexible microphone holding opening, the AMC4171 microphone clips/microphone holders are easy and convenient for the users to attach microphone to or remove microphone from the microphone holder. The AMC4171 clips are designed to hold your handheld microphones securely and easily with 5/8" X 27 metal threads for mounting the microphones to the microphone stands. Also, the AMC4171 clips can have the tilt angle adjusted easily for your microphone placement convenience.
Markarel
Reviewed in the United States on March 7, 2023
Works well, just tighten up the screw for larger heavier mics and you're good to go.
DD
Reviewed in the United States on January 4, 2023
Let's face it, equipment gets damage during move-in/out. Microphone holders aren't thought about but if one breaks before the gig... you're wishing you had a spare. Sure you can use tape but then you're having a hard time getting the tape off the mic and have to clean away the adhesive residue.For the working musician, here's a test to determine if you should acquire the clips:1. Do you have extra cables?2. Do you have tools?3. Do you have extra equipment?If you've answered YES to the thee questions above it means you're partially prepared for disaster. Finish your prep and get these extra mic clips.
JHawk
Reviewed in the United States on November 10, 2022
Love these clips. I needed 6 and these came in at the perfect time. These have the perfect tension and hold my mics in place. will order more when needed.
Thomas
Reviewed in the United States on January 25, 2021
These clips work as expected and are a good price when you get the three together.
Jim Parfitt
Reviewed in the United States on June 4, 2020
I prefer these to the 'normal' shaped mic holders, because these hold all different shaped mics. Also, you can hang the mic upside down, etc. Much better than the conventional mic holder. Actually, I just pulled one out and compared it to my old one, and there is a bit of a range of motion issue. They are more limited. It is mostly an issue when using a straight mic stand. You can't get the mic to sit horizontal. About 45 degrees from vertical is as much as it moves. But this won't matter if you have a gooseneck on the top of the mic stand. With a boom, you will need to place the mic stand a bit further away from your guitar to mic it. Not much. It's not THAT big of a deal. They open up as wide as my old one (whatever that is?). And so, accept lots of mics. And the build quality is fine. It's always good to have a few extras of these in case you need another mic stand..... and one appears without a top on it.
GT
Reviewed in the United States on April 15, 2019
5*****Stars product heavy duty although these are made inChina. I believe in quality in Atlas manufacturer to offer affordablePrices. So thank you for a awesome product.The ones I had used 40 year's ago were made in USA.Are still solid a little rust but still doing its job.I also have the cheep metal plastic ones they are flimsy.These will probably out live me and go on to serve it'sNext owners.
Ernie Tamminga
Reviewed in the United States on January 29, 2018
These clips have a strange design - it's not possible to mount a mic "straight/level" on a straight mic stand. Closest you can get to level is pointing about 45 degrees upward. Probably fine for some applications, but we wanted to mount a couple of shotgun mics on straight stands at back of auditorium, at a height above the heads of the audience, and have the mics pointing either straight ahead or about 20 degrees downward. Can't do that with this clip. You could do it with a "boom" stand, if you position the boom itself at about a 45-degree angle.
chrisp
Reviewed in the United States on August 19, 2017
Having recently been lucky enough to buy two top notch little pencil mics i realized that standard mic clips wouldn't work. To big or mic is to small.I rolled the dice and bought a box of 3 cheep little clips on Amazon for a fraction of what it would cost to buy the Sennheiser and / or Schoeps clips.Fraction! And they work and fit perfectly!Good job & thanks Amazon !
Recommended Products
