Your cart is empty.
Your cart is empty.
- This product is mainly applied to household appliances or low insductance loading and home electromotor loading control used for the similar purpose.
- Modular control device with compact size.
- Rail-mounted, standardized dimensions, and enhanced safety.
- Features a direct-acting inverted design, allowing combined installation with miniature circuit breakers in control and lighting panels.
- If contactors or contactors and circuit breakers are installed side by side, spacing plates must be added between them to ensure proper heat dissipation.
- Derating is required if the internal temperature of the distribution panel exceeds limits.
M. Adam Davis
Reviewed in the United States on July 13, 2024
I’m using this to switch a solar generator output into an automatic transfer switch. I’d control the ATS directly but it’s in another building and I need to control the link on the generator side. This works fine, and allows me to automatically disconnect the solar from the automatic transfer switch based on battery charge, solar input, load, and other factors I can measure. Eventually I’ll integrate more smarts based on weather report, likelihood of a power outage based on storm prediction, and other factors, but this is one more piece of the puzzle.
Oldshoes
Reviewed in the United States on April 25, 2024
Tested and works. I've been buying Baomain contactors for a couple years now - think I've bought 5 or 6 (maybe more) haven't had a problem with any of them, and they're used regularly.They call this a 50 amp contactor in the banner, they also call it an HC1-50/20. It's a 50 amp for low draw starts (AC-7a) - used to be called (AC1), and it is a 20 amp as a motor starter (AC-7b) -used to be called (AC3).I have this same contactor in the 3 phase flavor on a circuit for a 5 hp motor that runs dust collection system. I also have an amp meter in the circuit. The motor runs around 15 amps, but at start up I think I've seen it go as high as 28. So, these will handle a bit of over. Dust collector gets used a lot.5 Stars for The Baomain HC1-50/20
DL Thompson
Reviewed in the United States on June 3, 2023
Not much to say. Works well.
Customer
Reviewed in the United States on March 13, 2023
Reasonable priced contactor.
Antonio Frontera
Reviewed in the United States on April 12, 2023
Buen producto, cumplió con la expectativas.
john williams
Reviewed in the United States on July 17, 2021
Heads up! I also found loose parts inside contactor, but in my case the contactor also didn't work.
Curtis Knight Jr
Reviewed in the United States on March 6, 2021
The label on the front of the switch is not correct in the picture it requires a 240V control circuit to control the coil. Other than that misleading label the relay works great. I'll update with how long it lasts when it finally fails.
Recommended Products