Your cart is empty.
Your cart is empty.Due to the heavy demands put on the Dodge Ram 4WD pick-ups, one of those pesky maintenance items that are so often replaced a multiple-of-times could virtually now be replaced for the last time! The sway bar end links on the 2000-2009 4WD 2500/3500 (Diesel and HEMI) are prone to wearing or pounding out, and, even breaking when the truck is lifted on 2-post vehicle lifts due to the stress of the axel dropping.BDs Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life Urethane bushing design allows for greater flex without breaking and will not pound out or seize due to the elements. Things that even the competition would be envious of.All components are designed to be easily serviceable and wearing items are low cost to replace. Kits come complete with all hardware and can quickly be installed in approximately 1-hour.
Peter A Terrill
Reviewed in the United States on May 30, 2024
Very easy to install
Kindle Customer
Reviewed in the United States on October 10, 2024
I was impressed with the overall quality of the product (heavy duty) but if you are like me & installing these on a 2002-2005 Dodge 2500 be prepared to drill the hole for the frame mount. Not many of us have a 9/16" drill bit in our tool box & it can be a little intimidating. Just take take it slow & use a little oil or spray lubricant - be aware of the drill biting when it starts to break thru. Also, you can install the bushings in the link using the supplied lubricant & a deadblow hammer if you don't have a vice.
Spindoor
Reviewed in the United States on January 24, 2024
Great item you,can fill the difference when you install these ends on your Dodge. It does respond better then it was new. I have 15000k mi on this 2001 Dodge. Easy to install.2500. And it steers great.
Nathan Kersten
Reviewed in Canada on February 4, 2023
Much stronger than stock, worked great came as a set of 2
Benjamin C.
Reviewed in the United States on February 6, 2022
Great little upgrade to the suspension on my truck! Very heavy duty and well worth the money!!
MacK Smith
Reviewed in the United States on October 17, 2021
The folks at BD Diesel are not screwing around these things are amazingly beefy, look great and simple to install. 3rd Gen Owners... Find a big hammer, then set it aside and grab a BIGGER hammer. The stock sway bar end links are hard a heck to get out on the AXLE mount. Soak em in PB Blaster and beat them toward the inside. I didnt take my tires off, which would have helped get a better angle but I was swapping out my sway bar and isolators at the same time.
Jason and Wanda McCready
Reviewed in Canada on September 16, 2020
Best I seen yet. 06 Dodge Ram 3500. 5.9
Danielle Sherwood
Reviewed in the United States on February 22, 2020
I installed this along with a few other steering components to fix "Death Wobble" on my 02 ram 2500 and they are super solid. They take a few minutes to assemble but I honestly can't find anythinh to complain about. The only issue was, I had to drill the hole to 9/16 for them to actually fit. If you have to drill the holes, it will take you an extra hour or so but just plan on it and it is a pretty simple job. First time messing with a front end of any sorts and ended up not too difficult and looks sharp and has helped make the truck much more rigid up front.
Alex James
Reviewed in Canada on April 27, 2019
Good
Robert
Reviewed in the United States on April 1, 2018
These are awesome. The factory style is pathetic next to these. They install pretty easily. It says you don't need to lift the truck to change them but I did and also removed the tire for more room to work. I highly recommend changing the sway bar bushings while you're changing these. They're cheap and the stock rubber ones dry rot. Also, while urethane bushings are much better than the stock they will squeak. The end link kit does come with 2 small tubes of grease which I recommend using. They give you plenty for the endlinks and also enough if you are changing the sway bar bushings to grease those also. My only issue with these was where the link bolts to the axle the hole needed drilled out for the bolt to fit. Not a huge deal but I didn't see anywhere that said anything needed modified. Aside from that my only other issue with this is you have to assemble it. For the price, it should come pre assembled. I don't have a shop press so I just used a large C clamp and a small block of wood. It pressed right in without issue. Either way, these are great and crazy strong over the stock set up. I am 100% pleased. All the hardware is grade 10.9 and is extremely good quality. I can almost say it was enjoyable replacing these knowing I'll never have to fool with them again. Highly recommended. Just order them and do yourself a favor!
SR138
Reviewed in the United States on March 26, 2017
I recently purchased these to replace my old and worn oem end links. So far they work and look great! I did not have death wobble but every bushing in the front end was oem and cracked. I agree with every other review when they say its pure BEEF! Huge compared to stock. I have an 08 2500 so I didn't have to drill anything out. You do however have to install or "press" the bushings yourself. I used my vice and a bunch of the grease that it came with for the installation. After that, installation onto the truck was simple. I didn't even remove the tires. If any problems arise I will update my review. I installed these along with moog sway bar bushings and bilstein steering stabilizer. Overall my steering feels sharper and improved. Oh and did I mention it looks GREAT!!!! LOL
Johnny blaze
Reviewed in Canada on February 20, 2017
Great product super fast shipping thanks wound deffenitly recomend thanks
Jeff Pletch
Reviewed in Canada on July 23, 2015
Looks like an Excellent Product. Time will tell as to how it stands up and how it handles the salt in the winter.2018 Update!Still Loving them. Salt tarnished them a little the finish the 1st winter so I hit them with some black paint, but otherwise well worth the $.
Recommended Products
