Shopping Cart

Your cart is empty.

Your cart is empty.

BILIONE Microphone Holder, Large Mic Accessory Clip for Stands, Fit for Most Condenser and Wireless Microphones with Outer Diameter Range 1.26' from 2.3', with a 5/8' to 3/8' Screw Adapter(1Pcs)

Free shipping on orders over $29.99

$8.99

$ 4 .99 $4.99

In Stock

1.Size:2pcs


  • BILIONE team upgraded the microphone clip again: Threads have been added to the grip to increase friction due to the increased strength of the spring, It's easier to install and remove the microphone. Bottom threads upgraded from plastic to copper, greatly enhancing durability
  • Very Important!!! Please check the size of the microphone before purchasing. the microphone clip fits for most larger condenser and handheld cordless microphones with Outer Diameter Range 1.26" from 2.3". Not suitable for SM57-58 even mini mics.
  • Threads have been added to the grip to increase friction due to the increased strength of the spring, It's easier to install and remove the microphone. Bottom threads upgraded from plastic to copper, greatly enhancing durability
  • Most people said they like the neoprene sponge material inside it did not scratch microphones. This time, we've kept this part in place to help extend the life of microphones
  • If you're looking for a large size mic holder, this little thing will help take the worry out of it. Perfect for shows, recordings, live broadcasts, and other outdoor music events



Product Description

Microphone holder

BILIONE microphone clip is made of hard plastic with non-slip sponge inside, and come with a metal adapter, Sturdy and durable. The spring-loaded microphone clip inner diameter range is 32mm-60mm, This mic holder applies knob adjustment design, which is convenient for you to adjust the angel of microphones

WIDE APPLICATIONS: The mic clip has a strong elastic force to change the size of the clip, suitable for some condenser microphones with a diameter greater than 32mm and less than 60mm, such as AT2020、AT2020USB+、AT2035 Fifine K669B etc. It's also suitable for some Kareoke microphones or Handheld Wireless Microphones like Wireless Mics, FIFINE K6, Atr2100, Samson Q2U and more.

In fact, we have already had a similar basic wheat clip released and have received numerous customer feedback such as the following paragraph: “It appears well made and strongly assembled. It screwed in easily and there was an adapter included in case I needed a different size. The grip is padded by a cushion which just enough grab to keep the mic securely in place. The clamp itself fit both my smaller barrel plug-in mics as well as my larger barrel cordless mics with ease. I feel very confident using this with my mic stand, it was worth the money and believe I will be using it for years to come”

We always believe that feedback from our customers is the best teacher for us to keep improving, so we have made improvements on the basic microphone holder in the hope that it will be effective!


Thomas Usher
Reviewed in the United States on March 9, 2025
This is really good for the price. I know they make better microphone holder, but this will get the job done. It is all plastic and has the pressure clamps to accommodate for most microphones with a stem/handle. You can also adjust and tighten the angle with a twist know on the side. Pretty straight forward. I am happy with it. I just hope the spring clamps hold up well over time.
J.R.
Reviewed in the United States on March 9, 2025
This is a good deal for a pair of mic clips which can handle a wide variety of microphones. I have some wireless mics which are large and don't fit into the standard clips designed for standard Shure mics like the SM57 or SM58. These clips are spring-loaded and can handle much larger mics. As an added bonus, the kit includes screw adapters in case the mic stand only has the smaller 3/8 inch screws.
American Dude
Reviewed in the United States on March 15, 2025
The thread was accurate enough to fully screw on and the clip is strong enough to hold a mic without slipping. I got this for my kids mini mic and it even holds that well despite it being a smaller diameter.There’s some nice padding that’s well secured on the inside of the clip so I’m happy about that and it not scratching any mics I’ll put inside it.It’s easy to open and it locks down on the mic securely so it’s a good one.
Oldporkchops
Reviewed in the United States on March 15, 2025
This set of two microphone clips comes with adapter rings that are made from plastic. I do recommend them except that if you find a set that has metal adapter rings, those would be more ideal as the threads would wear down much more slowly. The tension on this clips is decent although you would want to err on the side of caution with tighter tension, not less. This is one set of clips that has tighter tension, so this means you do need to exert much force to get the jaws to open.Overall, this is a set of microphone clips that I would recommend.
Suelzle
Reviewed in the United States on March 14, 2025
Got these because we can never seem to find the mic clips when we need them. Especiallly the correct ones for the correct mics. We either find one that is too big or too small or won't stay up because the screw is stripped. Got these and they work great!Pros+ Sturdy. These clips have brass insets for screwing into a stand. They won't loosen over time. The plastic is very durable. The hinge is solid. Everything on these clips should last a long time.+ Size. These clips can hold mics of all sizes. From an instrument mic to a handheld wireless. VERY versatile. Just note that these clips will probably not hold large-diaphragm condenser mics like the Rode NT1.+ Strong. The clip springs are very strong. Holds a heavy cordless handheld just fine in any position.+ Versatile. The adjustement angle allows you to have a straight stand or a gooseneck or a boom stand and get the right angle no matter what.
Big Homely Guy
Reviewed in the United States on March 13, 2025
Finding mic clips for wireless microphones can be a real frustration. While I don't 'love' the way these clips look, they are very functional and hold the microphone in place really well.Performers intuitively know how to operate these clips, so on festival stages these are a real no-brainer.
Emmett L Thomason
Reviewed in the United States on March 11, 2025
Got these to replace an older-style clip that was perfect for older mics (SM-58, etc) but too small for wireless mics I use now. These clips came quickly, and were a perfect fit on typical mic stand threads. Perfect size for larger diameter mics, but can close tight enough that you can still use the smaller if needed. My only concern is that the clip springs are actually quite strong, but the plastic wings seem a touch light; I wonder if these will eventually snap or crack when opening the clip up to full width. Overall, was a great replacement and is much more versatile than older styles.
Xrawksmafacex
Reviewed in the United States on March 10, 2025
These microphone clips are awesome. They're made of a thick durable plastic, the clips are lined with a dense rubber foam to protect the mic and add clamping friction. The angle adjuster isn't a flathead screw, it's got a tool-less design that allows for on the fly adjustments. The stand mount is brass insert. These will handle the large diameter of my wireless mics, have the clamping pressure to hold them, and I see them lasting a very long time under normal conditions.