Shopping Cart

Your cart is empty.

Your cart is empty.

Boatman 9 7/8x8,9 7/8x9,9 7/8x10 1/2,9 7/8x11 1/4,9 7/8x12,9 7/8x13,9 7/8x14 Boat Propeller fit Yamaha Outboard Engines 25-30 Hp,10 Spline

Free shipping on orders over $29.99

$79.50

$ 37 .99 $37.99

In Stock

1.:9 7/8x8


2.Color:25-30hp


  • 【Model Specification】: 9 7/8 Diameter x 8 Pitch,10 Spline Tooth; Right Rotation; 3 Blade; adopt High Quality Aluminium material with 4 layers of paint better performance
  • 【Propeller Match】: Our propeller fit Yamaha Outboard Motor 25-30 HP,Ref No.664-45943-01-EL.Outstanding acceleration and top speed are not inferior to the original quality
  • 【Sold As Seen In Picture】:Prop received exactly as picture showing: Smooth cup-shaped blade surface, brass sleeve, high-quality aluminum. Fit your boat perfectly
  • 【Easy installation】: Only need to install the new propeller using the new attributable hub kit, the whole process does not exceed 10 minutes, before repairing the propeller, be sure to switch the engine to neutral and turn off the ignition device
  • 【Free Service】:Diameter and pitch of the propeller are consistent with the original manufacturer. If you have any questions about the product, please contact us. We accept free returns and exchanges



Product Description

1
2

3
Outboard Boat Propeller Fit Yamaha engines

  • Number of splines: 10
  • Blade: 3
  • Material: Aluminium Alloy
  • Color: White
  • Rotation- Right Hand (RH)

Fit Yamaha Engines 20/25/F25/30HP

Engine Application:

3.00" Gearcase

  • 20 HP 1996-1997
  • 25 HP 1980 and Newer
  • F25 HP (4-Stroke) 1998 and Newer
  • 30 HP 1983-2002
  • 9 7/8 Dia x 8 Pit---OEM NO.664-45943-01-EL
  • 9 7/8 Dia x 9 Pit---OEM NO.664-45941-01-EL
  • 9 7/8 Dia x 10 1/2 Pit---OEM NO.664-45945-00-EL
  • 9 7/8 Dia x 11 1/4 Pit---OEM NO.664-45947-01-EL
  • 9 7/8 Dia x 12Pit---OEM NO.664-45954-01-EL
  • 9 7/8 Dia x 13Pit---OEM NO.664-45949-02-EL
  • 9 7/8 Dia x 14Pit---OEM NO.664-45952-00-EL

AZ

Direct Replacement

The diameter and pitch are re engraved according to the original factory and can be easily replaced. The whole process only takes 10-20 minutes

A

Rubber Hub

Upgrade the rubber wheel hub, make it more wear-resistant, prolong the service life, and make the ship run efficiently

AS

Sturdy Aluminum Alloy

Improve the metal ratio and increase the content of rare metals to make the propeller more durable. The 4-layer spray painting makes the blade surface smoother and delays the erosion of seawater to a certain extent

3

Durable & Reliably

The propeller is constructed of sturdy aluminum alloy, make that this boat propeller is durable enough

9

Greg K.
Reviewed in the United States on July 1, 2023
This does NOT fit a 2000 Yamaha F25. The thrust bearing won't fit in front of the hub and the rear of the hub is not long enough to cover the splines and leaves too much shaft for the nut to go on without some kind of extra spacer. Not even close to fit on the F25.
Ashley Randall
Reviewed in the United States on June 25, 2023
One of the best aftermarket props iv used. Fits perfectly. Gained 4mph on a 1.5" pitch differnce
rousseau christian
Reviewed in France on October 28, 2023
non conforme pour Yamaha 25cv 4 temps injection F25GMHL 2018.Contrairement à ce qui était indiquéSurtout que j'ai mis le Numéro de série. Cannelures trop courtes de 3 cm,Obligé de bricoler avec des rondelles !!!Vais faire essais en mer pour compléter
John C
Reviewed in Canada on September 26, 2022
Fit just as good as original
Recommended Products

$47.00

$ 21 .99 $21.99

4.3
Select Option

$33.50

$ 17 .99 $17.99

4.5
Select Option