Your cart is empty.
Your cart is empty.Product Description
STSEETOP Camera Lens Hood
- This hood main function is to avoid reflection when photographing & shooting through glass / windows.Once used in reverse, it can add a simple waterproof splash protection for the camera and avoid damage caused by spray, snow, dirt, sand and gravel.
- When you're shooting through a hotel window, a skyscraper observation deck, the window of a bus or a zoo enclosure, removing glare by day and reflections by night, can be used any time you need it. Lightweight and portable, easy to carry and use.
Function Show
- Compatible: This lens hood is compatible with 50-70mm and 70-90mm lenses(Check the size when you buy it), please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Φ" (diameter) symbol.For example: Φ58 = 58mm lens thread size.
Quickly detaching and mounting. Normal mode and reverse mode for using.
- Quickly detaching and mounting. Normal mode and reverse mode for using.
Bob Parker
Reviewed in the United Kingdom on August 21, 2024
Was gaining to use this for nightshifts through windows. I got the 50-70 size to fit a 67mm lens. really struggled to get it on. When fitted the actual bit that fits to the window flops around, and doesn't give a perfect seal. Spent more time trying to keep it against the window rather than concentrating on the image. Not a good product in my judgement.
Glenn Hunt
Reviewed in Australia on October 11, 2024
Very handy to keep in your camera bag to take pictures out of plane windows or any reflective glass. Take it to the zoo and get shots others miss in fish tanks, glass cages etc.
DH
Reviewed in the United States on June 27, 2022
This does remove reflections in a car or bus window, but... I bought it for a bus trip in Europe. However, the rubber is too soft to keep on a moving window without keeping a hand on the hood to avoid your lens from hitting the window. It does fold up easily when not in use but I would prefer a harder rubber to do a better job. Also, as other reviewers commented, make sure you order the right size as there is very little give.
Andru Sanchez
Reviewed in the United States on March 23, 2022
This thing is absolute garbage. It can't hold it's shape for anything. Does not fit my 50mm lense at all. droops like a wilted flower, and falls off if you even think about it wrong. Don't waste your money, it's not even worse it's extremely low price. returned almost immediately.
Chip64
Reviewed in the United States on January 5, 2022
Works as advertised but very difficult to put on the 77mm lens.
Pat Johnson
Reviewed in the United States on June 7, 2021
I found this cover to be too weak to use. The material was not thick enough to hold its shape and would droop. Returned.
Mark n hoagberg
Reviewed in the United States on November 6, 2021
I love this low-cost option for eliminating reflections when shooting thru glass windows. Order the correct size! The stretch is good, but you can't force the stretch beyond what the mfr recommends. I used this with my iPhone 12ProMax by handholding and it worked marvelously. On my DSLR, the fit is perfect. For the casual user (non-pro) this product is perfect. I was able to fold it up in my pocket and my bag, and it shows no stress from folding. I would say this is a great product for what it is intended unless you make a living out of shooting thru glass.
J. Sroka
Reviewed in the United States on September 2, 2020
I purchased this hood for my lens with a size that fit the add. I had a hard time installing the hood, although I did get it installed. Once on the lens it interfered with the lens functions, focusing, and adjusting. The hood was also a little to flexible for my use. I did return it for a full refund. Will probably work for most lenses, just not mine.
devynatorsmom
Reviewed in the United States on July 12, 2020
We needed this lens hood to help reduce the reflections off the glass boards at club hockey games. This hood creates a very wide cone so it pretty much eliminates reflections off the glass from behind us where we were taking the pictures. The material is soft and can be easily folded and stored in a pocket when not in use. It snaps right back into its original shape. This lens hood can fit a wide variety of lens threads, so don't expect a perfect fit. It's a little slick, so it likes to slide back onto the neck of the lens, which it turns out isn't a big issue. Overall, I'm pleased with this for the price.
Tina
Reviewed in the United States on June 24, 2020
Very flimsy but usable. Little suction power therefore, you will have to pay close attention that the hood is in full 360° contact with the glass or glare will be come an issue. At 3x the price, a lens skirt might be a better choice. However, if you are looking for something quick, easy to setup, shoot and go, then this is the ticket and at a reasonable price. My review is based on use with a 200mm telephoto lens
Daniele Silvaggi
Reviewed in Canada on February 22, 2020
This fits very snugly and does not give any glare.
rj
Reviewed in Canada on October 4, 2020
Have not used it yet, but fits on my lens perfectly. No question it’ll work exactly as advertised.
Recommended Products
$51.99
$ 22 .99 $22.99