Your cart is empty.
Your cart is empty.
The 40-Series is the work-horse of Cane Creek's headset line-up and incorporates all the features necessary for a durable, light-weight, long-lasting headset while offering the perfect balance of performance, durability and value
Features:
Contoured and relieved 6061-T6 aluminum for minimized weight and maximized strength, with split-lip sealed stainless steel bearings
Low friction, Dual-Seal crown race and top cover provides maximum sealing from contaminants, plus a captured compression ring design for carbon steerer compatibility (Interlok spacer compatible, sold separately)
Cane Creek ZS (Zero Stack)
Internal parts are cross-compatible across the 10, 40 and 110 series
Specifications:
Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K
Top Type:ZS - ZeroStack
Top Head Tube Inside Dia.:44.00mm
Stem Clamp Dia.:28.6mm
Top Stack Height:8mm
Top Bearing Type: Black Oxide, Sealed
Bottom Type:ZS - ZeroStack
Bottom Head Tube Inside Dia.:44.00mm
Crown Race Seat Dia.: 30.015mm
Crown Race Type:Steel, Face-Sealed
Bottom Stack Height:4mm
Bottom Bearing Type:Black Oxide, Sealed
Material:6061
Weight: 88g
Dagnasty
Reviewed in the United States on June 20, 2023
This is a perfect replacement headset for a straight tube 1 1/8 in fork. Bought a cheap brand before and had endless problems. This was set up and done in 30 minutes no issues. Great quality product.
KT
Reviewed in the United States on November 26, 2023
Perfect 1 day delivered. This fits 44mm top and bottom headtube to your 1 1/8 straight steerer tube with zero stack and 8mm top.
mike neal
Reviewed in the United States on October 21, 2023
I liked the headset, Came Creek is a well established bike component manufacturer. No complaints about the product here.MAKE SURE YOU ASSEMBLE THIS HEADSET EXACTLY HOW IT COMES OUT OF THE BOX! I assumed incorrectly that both bearing cups are the same, they are not. I didn't pay attention and got them backwards and had to knock them back out and re install. The bearing rides higher in the top bearing cup than the bottom. Like so many products today this comes with no instructions and even the online drawings do not point out they are different. Would it be too hard to mark them top and bottom?If you get them wrong you know because the fork will bind when you pre load the bearings. Fortunately I did no damage as I kept checking for binding while tightening the bolt.
BrianB
Reviewed in the United States on July 30, 2022
Nice headset, great upgrade from an old loose bearing headset. Installed with allthread, fender washers/nuts to pull it into place.
LS
Reviewed in the United States on February 25, 2022
Excellent product!!!
R. Rique
Reviewed in the United States on November 1, 2022
Installation was straight-forward, having the tools to install makes it very manageable (headset press, grease, mallet, headset removal tool or wrapped rebar and a sharp wrapped screwdriver), If one does not have the headset press, maybe consider going to a bike mech, this is too simple an installation to damage your bike frame in winging the installation. Knocking out the previously installed headset cups was the most challenging part. You can use a length of rebar and mallet to knock these out and then then the sharp screwdriver and the mallet to knock loose the previously installed crown race from your fork.I re-used the star nut that was already in my bike as I did not have the tool to install a star nut and did not want to put one in crooked, the cane creek star nut is a nice black colour but appears identical to my stock nut. Use a quality bike grease (parktool or phil wood) as this will contribute to sealing water and dust out.A very well made product both in design, aesthetic and construction. Steering movement is hella smoother and the ability to seal out water, dust is evident with the quality seals and cap. Durability has to be tested on the trails over time but I have no doubt this headset will stand up. When finished installation, test for play and do the ole' drop test and observe if anything rattles or comes out of place and adjust accordingly.
Jordan
Reviewed in the United States on August 8, 2020
the seller was more than willing to help with any issues i had and when the product arrived it was as described. this headset also fits the nishiki wasatch.
Jeff C.
Reviewed in the United States on November 16, 2020
Absolutely love this! Done a ton of research and this came out on top and was a great addition to upgrading my bike! Easy to install. Make sure you go to the website, great website for getting the info you need for the correct headset, and find the right one for your bike, check once, twice even 4 or 5 times to be sure. :)
Recommended Products
$8.99
$ 3 .99 $3.99