Your cart is empty.
Your cart is empty.Captain O-Ring’s replacement Viqua OR40-50 o-rings are compatible with AWP (Advanced Water Products) filter housings that call for the OR40-50 o-ring, as well as a number of other filter housings listed below.
Compatible with the following Advanced Water Products (AWP) housings and systems:
AWP40
AWP42
AWP50
AWP52
SC200-DWS10
IHS12-D4
IHS12-D4/2
IHS22-D4
IHS22-D4/2
IHS22-E4/2
Compatible with the following filter housings from Hydro Systems International:
Model 134-3135, 134-3235, 134-4135, 134-4235 Jumbo Housing
Model 136-3155, 136-3255, 136-4155, 136-4255 Jumbo Valve-In-Head Housing
Also compatible with the following other filter housings:
Aquios Jumbo Series 234/236, AQFS234, AQFS234L, AQFS236, AQFS236L, AQFS236W, DS300 (Aquios Part Number OR236)
Nuvo Manor GEN 1 housings [only compatible with the GEN1 Manor housings, not compatible with the newer GEN2 Manor housings which use a larger o-ring).
Simpure DB10 and DB20 filter housings (Not for DB10P & DB10C)
What to expect:
This item includes three (3) O-Rings in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.
Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
Customer
Reviewed in Canada on September 25, 2024
Great fit and works great!
Miranda
Reviewed in Canada on August 26, 2024
Thank goodness for Amazon! Could not find these in stock anywhere. Perfectly fit my Viqua unit!!
B
Reviewed in Canada on March 17, 2023
This is supposed to be compatible with the Viqua OR40-40. They are the same diameter but are thinner. No matter what you do they will leak. Spend a few more dollars and buy the genuine part
jr
Reviewed in the United States on September 18, 2022
Beware there is a "Gen 1" and "Gen 2" NuvoH20 Manor. Mine is a "Gen 1". At the top of the canister that holds the filter is where you will find this o-ring, it will measure 135.5 mm OUTSIDE diameter which means the o-ring would have 135.5 mm INSIDE diameter. The original o-ring is only good for a few changes then it will swell in circumference and no longer fit snug onto the canister. My new rule is, "never change the filter unless you have an o-ring on hand". Once your o-ring swells (and you won't know until you remove it) you will never get it to seal again, at least I couldn't. If you don't have a new o-ring, you have to wait get one to reinstall which could take days. If you order new o-rings from NuvoH20 for a "Gen 1" they too will not fit, too small in diameter and leak once water pressure is restored. SO - These o-rings fit perfectly. They are the correct thickness too.
Recommended Products
