Your cart is empty.
Your cart is empty.
Condition:100% Brand New & High Quality
Size:As Picture
Fitment:For Fitment:
For Echo PB-580T - Echo Backpack Blower (SN: P44614001001 - P44614999999)Carburetor
Echo PB-580T - Echo Backpack Blower (SN: P44813001001 - P44813999999)Carburetor
MPN:A021004331 WTA-35
Package Include:Package Includes: 1 carburetor + 1 air filter + 2 primer bulb + 2pcs gasket + 1 feet 6617 fuel line + 1.5 feet black fuel line + 2 fuel filter + 1 spark plug
Lori W
Reviewed in the United States on February 27, 2025
This will keep your Echo working perfectly
Birmah M. Purce
Reviewed in the United States on January 25, 2025
My husband very happy with purchase
Marc Fournier
Reviewed in Canada on May 2, 2024
Bought 1, installed it, started up, adjusted carb..... 2h in my blower stopped. Bought a second one, never got it to start. Bought an OEM one from Echo, started right up, running strong ever since. These cheap ones don't last, don't waste your time.
Morita
Reviewed in the United States on November 17, 2024
Great quality and economic value is great.How can I get help for the filter that goes over the top of the gas tank? I misplaced it and I can’t find it, it’s the only thing that didn’t come with the kit. I was so happy with the quality and components but I made a big mistake. Thanks
Roger D. Wallace
Reviewed in the United States on October 9, 2024
Took my 10 year old blower to the shop and was told it would be cheaper to replace it. Got this kit for a very low price and now the blower works like new again. Maybe I’ll get another 10 years out of it.
Mitch
Reviewed in the United States on January 18, 2024
it doesnt fit exactly. it requires modification. the fuel lines are different sizes. the fuel filters are smaller hose size. the idle down is slower. but i put it on, made the modifications, and it works. whats to know? the hi and lo adjustments do not require the impossible micro d wrench, and that made all the difference to me.
Mkiley
Reviewed in the United States on November 8, 2023
I was on the fence after reading reviews complaining about it not being a direct bolt up, but decided to give it a go anyway. Was pulling my hair out trying to figure out the issue with an echo leaf blower I had come in. Didn’t want to be throwing unnecessary parts at it until something worked but tried this carb out. Honestly the modification required was about 30 seconds worth of a small grinder bit in my drill to make room for the throttle arm, if I would have just gotten the carb in the first place and done this I would have saved about 2 hours of repeated assembly and disassembly. Once it was installed the blower started in two pulls then it was another 30 seconds of adjusting the jets.
Louis Collins
Reviewed in the United States on January 6, 2023
Was used to replace the WTA 35 Walbro carb on an Echo PB 580T backpack blower.It looked like an easy R&R when I unwrapped the kit. It certainly was an easy removal of the OEM carb and that is as far as easy was designed to participate in the procedure. I've had worse fits on after market replacement parts so saying it was hard is a little too much. Saying it was aggravating is the perfect adjective to describe the installation of the replacement carb, if curse words are not going to be used. Side by side they appeared close but #1) the primer hose connection is too small for the existing hose and the hole in the grommet in the top of the fuel tank for the primer is too big for the supplied primer line.. Cut existing short, cut and insert new line into existing then cut to fit. I was able to make the existing fuel line work. the throttle shaft is shorter than existing and the connection for the cable is oriented differently. thought the orientation was the reason I couldn't get the throttle to return to the idle position, even with the cable adjustment but I finally discovered that the shorter throttle shaft didn't allow the connection and cable end to clear the lower side of the intake body and it was binding. Before I ground the lower area, I tried bending the connector outward and luckily that let it clear the body. Neither fuel filter matched or fit and the spark plug didn't match and is still in the box it arrived in.On a brighter note, the 2 mounting gaskets and the air filter worked and the Hi and Lo adjusting screws are fully exposed with slotted heads as opposed to the recessed Single D screws on the original. Once all of the issues were addressed, it fired it up on the second pull, adjusted the carb and it is running fine.These Design Engineers should have to actually put hands on and run the factory unit. Instead they reduce the original size specs, including hose connections, in order to reduce prodution costs to allow them to offer a replacement carb for less money.I'm done
Christopher J. Moore
Reviewed in the United States on April 17, 2023
The air filter fit, but that was the only thing that worked on an Echo PB-580T backpack blower. The hoses were smaller diameter, the filter was smaller and the carburetor didn't even come close to fitting. It would bolt into place, but the shaft is not long enough at the throttle cable attachment point, and it hits the body of the blower. This doesn't allow the throttle to move more than a 1/16th of an inch. The blower will idle and nothing more. And forget trying to change the shaft to the one from the OEM Walbro carb. None of the dimensions are the same. This kit is borderline useless. The carburetor is fully useless for a PB-580T.
Recommended Products
