Your cart is empty.
Your cart is empty.Product Description
Carl E. Potts Jr.
Reviewed in the United States on March 17, 2023
Exact fit. Works as good as the original
KH
Reviewed in the United States on March 25, 2022
After doing proper troubleshooting, like jumping the starter motor to rule in the relay and rule out the starter motor and making sure power gets to the starter "S" terminal you can pretty much determine the solenoid is the problem, unless the battery is weak. However, mower immediately started after replacing this solenoid. Keep in mind many Toro mowers have 20 and 30 amp fuses in line with the key and starter solenoid, check fuses first. Not sure if other mowers have the same wiring design, get a schematic or back trace the wire.
DONNA H STARLING
Reviewed in the United States on July 16, 2021
Ordered for Toro mower, part was installed easily but did not work. Checked and rechecked the install, but again part did not work. Went to a local auto part store purchased the same part, installed it, and worked it works perfectly. Amazon did a quick refund. I'm sure this happens with a lot of these types of parts, so buyer beware. Other reviews state no issues.
Frank Goodman
Reviewed in the United States on June 27, 2021
Fits my toro timecutter ss5000 perfectly and aall the terminals are exactly the same size as the original OEM solenoid. Assembed in about 2 minutes. Works perfectly.
Mover and Shaker
Reviewed in the United States on April 11, 2021
Not really good at Mechanical stuff and I Fixed my Zmower with this part!Easy to install, great value, peace of mind.
ckrug
Reviewed in the United States on October 1, 2020
Got this for my Toro Timecutter mower. It works fine, it was a little hard to get to the mounting screws because of the location in the mower, not the fault of the solenoid.
GMBill
Reviewed in the United States on May 5, 2019
Replaced my old, non working solenoid with this solenoid and my mower fired right up! I had wasted time buying one from a so called parts place that didn't even take the time to look up the part needed got it home and it failed, returned that for a refund ordered this one and am very pleased.
Thomas Workman
Reviewed in the United States on April 3, 2019
My zoro zmaster with the 23 hp Kawasaki should symptoms of clicking when turning the key. Battery voltage was good and the battery is maintained by trickle charge. Felt the solenoid while turning the key and it “clicked” but failed to transmit current to the starter. Got the part number from the manufacturer.Installed the new solenoid and was up and running within minutes. While you have everything disassembled, if you have a jump box, apply 12vdc + to the starter hot post and apply gnd to the - neg battery terminal.The starter should crank. If it fails to crank when power and grounded, the starter is bad. This will apply to about all electrically started gas engines.
Recommended Products