Your cart is empty.
Your cart is empty.Product Description
The cooling fan clutch is a cooling system component that controls the operation of the engine cooling fan. When the engine overheats, the radiator needs the help of the cooling fan to blow air into the device. After the engine reaches the proper operating temperature, the fan clutch will be mechanically disengaged, thus saving some power for your vehicle.
Item Specification
Item Type: Engine Cooling Fan Clutch
Placement on Vehicle: Front
Material: Steel
Rotation: Standard Rotation, Clockwise
Reference Number: 1621075060
How to Replace a Bad Fan Clutch
Removing the Fan
Mechanically driven fans with four bolts
Loosen the bolts in the fan cover to remove the fan. After that, disconnect the fan shroud and remove the shroud. Pull out the nut that secures the fan to the pump pulley, hold the fan and pull it forward with a slight rocking motion until the fan is loose and finally comes out.
Cooling fan with large nut
Disconnect the fan sealed by the large nut. Insert it around the bolt on the pulley. Use a large wrench to turn counterclockwise to loosen the nut.
Disconnecting the Clutch From the Fan
Set aside the detached fan. Make sure that the shaft is up. Use the suitable socket and ratchet to remove the bolts that fasten the clutch to the fan.
Installing the New Fan Clutch
Align the new fan clutch in the position and secure it to the fan by tightening the bolts. After that, reassemble the fan and shroud.
The replacing steps are only for reference, and we recommend you to ask the technician to do the installation.
Customer
Reviewed in the United States on June 3, 2022
fit perfect
Matt
Reviewed in the United States on September 15, 2021
Fit fine but it’s not functional. Installed on my 1997 4Runner (3rz) and the clutch was unfortunately engaged full time. My mpg and power were drastically decreased. . Drove it 600 miles in hopes it would just need some break in time and it never freed up. Ended up pulling it off and going to an electric fan.
DaShredder7
Reviewed in the United States on February 1, 2021
Perfect fit!!! Just to put it out there. This fits on the 1999 Tacoma 2.7 engine be aware there is different variations on fans but just get the serial # and match it with product. But works great and really affordable!!!
Recommended Products