Your cart is empty.
Your cart is empty.Fit between the shoe sole and the cleat to protect carbon soled shoes.Compatible with all crankbrothers MTB cleatsStainless steelIncludes 2 shoe shields8g per pair
william hoyle
Reviewed in the United States on February 18, 2025
Well worth the $10 to protect the greater investment I’ve made in cycling shoes! This is the second set I have purchased.
bsek23
Reviewed in the United States on August 15, 2024
This is good to have to protect your shoes a bit more
Mark L. Robinson
Reviewed in the United States on June 30, 2024
I just bought new high end MTB shoes which included a warning label to the effect that if cleats damage the soles warranty is void. I have used crank bros cleats and pedals for years. Adding the cleat protectors to the new shoes has made a large improvement in entry and release. Much smoother. fit and finish are excellent.
A.M.
Reviewed in the United Kingdom on June 27, 2024
Using these with Time Atac cleats as my carbon soled Lake shoes specify a shield needed to protect sole
Samuele
Reviewed in Italy on May 24, 2024
Devo ancora installarli perchè non mi sono ancora arrivate le scarpe.Ad un primo sguardo sembra siano state lavorate al laser.Qualità di materiale e di lavorazione.Ritornerò a dare la mia impressione appena le monto sulle scarpe nuove.
H.S.
Reviewed in Germany on May 19, 2024
Perfektes Produkt, entspricht meinen Erwartungen.
ThaddeusJ
Reviewed in the United States on April 28, 2024
I got some new SIDI mtb shoes on closeout that have carbon soles. Wanted to protect them from the cleats I mounted. Work great.
Ricardo Excheverry
Reviewed in Mexico on April 2, 2024
Bien
ZINgear
Reviewed in the United States on June 29, 2023
Prevents shoe wear on match systems. Adds a stiffer platform for pedal and pumping. Engagement is better than a brand new shoe feel! Shoe worn 2 seasons now. Sooo SOLID!
UnoMas
Reviewed in Spain on November 12, 2020
Encajan perfectamente, al ser metálicas si durabilidad será mayor. Perfecta función de protección de suela.
John
Reviewed in the United States on December 10, 2018
I must admit I only bought these because I was watching a video review of the top 5 or top 10 things you can do to improve your riding/bike. The Crank Brothers bike shoe shield ranked right near the top. I bought two packs thinking that one pack contained a metal shield and a spacer pad.I was surprised, pleasantly so, to find that one pack contained two metal shield (as seen in the pics) and instructions. I opted to swap out my cleats at the same time. It looked like the cleat grub screws would not thread in enough. Well I was wrong. As Crankbrothers' say they "...will not interfere with your mounting..."I use the TIME ATAC cleats and TIME MX4 as well as some older TIME ATAC pedals. The crankbrothers work great with these cleats, shoes/boots, and pedals. In fact it is as though you are both clipped on and floating at the same time. You have super easy side to side movement. Exceptional clip in access and very easy release. I am extremely pleased. For the money an improvement you should not think twice about doing.In the pack you get the two metal spacers only. I had purchased the cleats and hardware separately. Now I have a spare set new and in my bike tool box. Thank you for such a great product!!! Three thumbs up.john
K. Metcalf
Reviewed in the United States on August 20, 2014
At this point (Just install several days ago) function much better than other shims used in the past. They appear to be designed to allow these protrusions on the bottom side of the bronze cleat, to engage the sole of the shoe, thus may be effectively resisting cleat rotation, while "Stepping ... IN or OUT, That's a good thing. The material is thicker, wear resistant, than the run of the mill shims out there today.Note ! This is the only type of pedal I've ever used. I did not realize the "Spring" Contacts the inner 4 contacts of the pedals engaging ability have damaged all my SIDI shoes soles. I would have thought Crank Brothers would have had provided these metal shields years ago, to avert damaging the soles of their customers expensive riding shoes. The nature of the clamping action and reduction of the "Egg Beater" hot spot to the rider may be reduced with the use to the new "paddle" "Candy" type of pedals. However shoe wear may eventually widen the clearance gap of the shoes sole and the flat surfaces of the paddle type of pedal causing the hot spot to reappear without installing the "Crank Brothers Candy Tread Contact Sleeves" which tend to crack when installing on the shaft end of the pedal. Because the "Egg Beater" design by comparison to other pedals out there today, where shoe wear may not negatively effect the comfort and thus relieve the propensity of "Hot Spot" because of wider shoe contact surfaces, those of other manufactures pedals, are not "as nearly" impacted by "Shoe Wear". I wonder if Crank Brothers might eventually scrap or redesign the "Egg Beater" pedal to lessen the damage to it's customers shoes. I wonder too, if this company is willing compensate those customers who have damaged their shoes over the years ?
DB BluBlock Productions
Reviewed in the United States on June 4, 2014
My old Shimano shoes are shredded around the cleats from clipping in and out in a hurry. I started using these on my new Shimano and Specialized models and the shields work like a champ! No damage to the shoe bottoms and clipping in or out is smoother/easier. They should provide these with new beaters and drop the plastic spacer that's included. Either way it's well worth a few bucks to save your cycling shoes, which we all know can get expensive quickly!They've held up well over the last few months and were simple to install. I can't see why you would ever have to replace them, so it's a one-time purchase as far as i'm concerned.
Recommended Products
