Your cart is empty.
Your cart is empty.
The Criditpid CCW1H auger motor is an excellent choice for replacement of the Vogelzang, Breckwell, US Stove, American Harvest, Ashley, King 80488 and 80457 auger motor. This motor has 20" wire electrical connection leads and a hole drilled in the shaft for securing with a cotter/set pin (not included).
【Note】
Some models will use this motor as the auger feed motor and others as the agitator/stirrer motor; please see our model notes for specifics. This is a sealed bearing auger motor with no lubrication or oiling required.
Compatibility:
➤ Ashley/King Pellet Stove:
◆ 5500
◆ 5500M
◆ 5500XL
◆ 5500XLT
◆ 5502M
◆ 5510
◆ AP130
◆ AP5710
◆ AP5770
◆ AP5780
◆ AP5790
◆ APC1406
◆ APCI1406
◆ KP130
➤ Breckwell Pellet Stove:
◆ SP1002 Big E ll
◆ SP6000 Heartland Multi-Fuel
◆ SP8500 Multi-Fuel (Agitator)
➤ US Stove Pellet Stove:
◆ 5500
◆ 5500M
◆ 5500XL
◆ 5502M
◆ 5520
◆ 8500 Multi-Fuel Furnace (Agitator)
◆ American Harvest 6033 (Agitator)
◆ American Harvest 6035 (Agitator)
◆ American Harvest 6037 (Agitator)
◆ American Harvest 6039 (Agitator)
◆ American Harvest 6039HF (Agitator)
◆ American Harvest 6039i (Agitator)
◆ American Harvest 6039T (Agitator)
◆ American Harvest 6041
◆ American Harvest 6041HF
◆ American Harvest 6041i
◆ American Harvest 6041TP
◆ American Harvest 6100/6200/6220 (Auger & Agitator)
◆ American Harvest 6500 Furnace (Agitator)
➤ Vogelzang Pellet Stove:
◆ VG130
◆ VG5770
◆ VG5790
Specifications:
★ Volts: 120 V
★ Amps: 1.03 A
★ Cycles: 60 Hz
★ RPM: 1.0
★ Direction: Counter Clockwise
★ Wire Length: 20" with ¼" Male and Female Terminal.
robert brewster
Reviewed in the United States on February 9, 2025
fit and worked well
Kindle Customer
Reviewed in the United States on March 27, 2024
Product did not work. I want to return it. Very frustrating experience overall.
John Lambert
Reviewed in the United States on March 11, 2024
The media could not be loaded.
Thomas
Reviewed in the United States on February 20, 2024
I can't get the old piece one off, where do I buy a new one? It's some kind of set screw that no Allen key fits.
Catsofmany
Reviewed in the United States on November 16, 2024
Very disappointed with this part. It's noisy for one thing and the other issue is the stove wasn't putting out heat like it did last year. We discovered our stove came with a 1.5 RPM and this part is only a 1 RPM. We've always run our stove on the lowest settings and our house has been very warm. We ran our feed rate at 2-3 lbs. per hour and the heat setting at 2. Because of the difference of RPM we had to turn up our settings. We now run the feed rate at 4 lbs. per hr. and the heat setting at 3 during the colder times and back off to the lower settings when the temps are higher. The noise is aggravating but we'll live with that for now.
Robin Q.
Reviewed in the United States on March 17, 2023
So far so good, our USSC Ashley pellet stove(now discontinued) is a whole other subject.
Customer
Reviewed in the United States on February 14, 2023
Easy to install. Problem is every time it cycles there is a loud whining noise. Very aggravating being in family room. Are they supposed to be loud? Frustrating
Jamie Laufer
Reviewed in the United States on December 20, 2023
This item will not work correctly. 80488 needs to be 1.5 RPM. This is a 1 RPM.
Recommended Products
