Your cart is empty.
Your cart is empty.
OCuLink PCIe SFF-8611 4i to OCuLink SFF-8611 SSD Data Active Cable 50 cm
This OCuLink cable can be used to connect internal devices, e.g. a backplane with OCuLink SFF-8611 connector to a controller with OCuLink SFF-8611 connector.
OCuLink SFF-8611 male to OCuLink SFF-8611 male
Lock to Mating Part: With Active Latch
Data transfer rate up to 64Gbps
Cable length: 50cm
System requirements:A free OCuLink interface
ethan
Reviewed in Germany on February 18, 2025
Worked perfectly to connect a GPU to a laptop. Thanks.
Matt G
Reviewed in the United States on February 15, 2025
Perfect for my DIY egpu setup. Got this, along with an oculink board and PSU and all work together perfectly.
Gareth R
Reviewed in the United Kingdom on January 25, 2025
This was a relief after reading some of the reviews that were translated I was concerned that it might not work with the GPD G1 7600m XT graphics dock with my GPD Win 4. However that wasn't the case IT WORKED! it was actually outperforming the official supplied 1m GPD Oculink cable, I noticed the benchmark test scores for GPU went up along with the FPS counter. We are talking 2-5 fps better and more points as a result on the synthetic bencharking tests. I can not wait for my new mini pc to arrive which has Oculink combined with this cable which is far easier to position and provides better Oculink results.Just make sure it's pushed in all the way the click to lock it in isn't so strong which is why some may have thought it wasn't compatible but be patient and it will make a secure lock to the latches and give a good quality connection.Another benefit is the cable is wider but more narrow so it is more flexible too.
Tom
Reviewed in the United States on January 21, 2025
Works well.
麓丸禄
Reviewed in Japan on September 23, 2024
GPDG1で使えませんでしたのでこの目的で購入した以外のSSDを増設する際の「データケーブル」としてはおそらく問題ないでしょう英語のレビューはUSB4を同時接続してて勘違いしてると思います
Chong Vang
Reviewed in the United States on September 15, 2024
Not 50cm (19 inches) as they claim.
aurora522
Reviewed in Japan on September 11, 2024
GPD G1純正ケーブルは1mと長いので短いケーブルが欲しくて50cmの本ケーブルを購入したが動作しなかった。確認した機器の組み合わせです。GEM10内蔵OCulink ⇔ GPD G1純正ケーブル ⇔ GPD G1 :◎GEM10内蔵OCulink ⇔ ONEXGPU純正ケーブル ⇔ GPD G1 :◎GEM10内蔵OCulink ⇔ 本ケーブル ⇔ GPD G1 :×GEM10&GPD G1純正OCulinkカード ⇔ GPD G1純正ケーブル ⇔ GPD G1 :◎GEM10&GPD G1純正OCulinkカード ⇔ ONEXGPU純正ケーブル ⇔ GPD G1 :◎GEM10&GPD G1純正OCulinkカード ⇔ 本ケーブル ⇔ GPD G1 :×以上の他、GPD G1の代わりにM.2 NVMe SSDをOCulinkに変換するボードを使用して外付けSSDとして使用してみましたが上記と同様の結果でした。純正ケーブルは青以外の電線も使われているのですが、本ケーブルは青の電線しか見えませんでした。amazonで販売されている3000円程度のケーブルですが商品写真では色違いの電線が見えており純正と変わらないように見えたのですが届いた実物は青の電線のみでした。ちなみに、異なるショップから3本購入したのですがいずれも動作せず、袋に記載の型番は「SF-014 ・・・」、・・・はショップごとに異なりましたが先頭はSF-014、見た目と使われているコネクタは同じでした。なお、レビューではGPD G1で使えている方もおられるので製造ロットによる不具合の可能性もありますが・・・。
devmc
Reviewed in the Netherlands on May 16, 2024
Veel kabels geprobeerd maar dit werkt goedBlij mee
Richard Price
Reviewed in the United States on March 7, 2024
As stated did not work with Minis Forum 780 XTX and OneXGPU. I ordered a new cable from ONEXPLAYER and will update if it works since we are in early days of Oculink eGPU.UpdateI got the latest oculink cable from the most the egpu manufacturer and it works great.
Felix Pereira
Reviewed in the United States on October 28, 2024
Cable did not work with my OneX egpu. Tried mutiple times but could not make it work.Better but the original one.
Nabil
Reviewed in the United States on January 22, 2024
I have tried a lot of OcuLink cables with my GPD Win Mini and the GPD G1... this is the only one that has worked. All the others that I've tried do not detect the eGPU.Wished they offered a 100cm option, because the 50cm is just too darn short.
Nicholas Adams
Reviewed in the United States on April 5, 2024
This cable does not work with the gpd 2024 model and 2023 win mini. Buyer beware. Seems to be good quality though.
Customer
Reviewed in the United States on December 11, 2023
This works with the GPD G1. Funky smell.
Recommended Products