Your cart is empty.
Your cart is empty.
Dual Ports Mini SAS HD SFF-8644 To Internal Mini SAS SFF-8087 PCBA Female Adapter With Low Profile Bracket
2-Ports SFF-8087 to SFF-8644 Adapter with Full PCIe Slot Profile Mounting Bracket;
External 8644 to internal 8087 adapter, will work both on the host and device side.
Supports External SFF-8644 Host Connectors.
Supports Internal SFF-8087 Device Connectors
Supports up to 12Gb/s Mini SAS HD Data Transfer Rate
With Lowe Profile and Standard Profile bracket.
The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.
These new HD Connectors will be used on the SAS 3.0 specification when it is released.
Bastian Goffart
Reviewed in Germany on January 8, 2025
Leider passt der Adapter nicht, wenn im Gehäuse ein Mainboard verbaut ist.Da auf dem Adapter nicht viel Technik verbaut ist hätte man ein deutlich kleineres PCB verwenden können um solche Probleme zu vermeiden. Aus meiner Sicht ein simpler, aber ärgerlicher Designfehler.Für reine Plattenboxen ohne eigenes Board oder wenn ein Gehäuseslot unterhalb des Mainboards frei ist, ist der Adapter nutzbar.
MR STEVEN ATKISNON
Reviewed in the United Kingdom on December 21, 2024
quality looks good, but the metal work is design for PCI slot not PCIex, so the screw hole is one the wrong side for my supermicro server.
Jason A. Lari
Reviewed in the United States on January 18, 2024
First I will say that so far they working and doing their job well, but whomever designed them clearly never tried to install them into various styles of cases. First and biggest problem is that the low profile bracket is facing the wrong way. Low profile cases and brackets all have the screw hole on the other side and it's facing to the left, but this one has them designed like a standard height slot. Thankfully the small form factor case I installed this in won't be affected too much as I am only using it to store the drives that will be used, and it has no motherboard or any other cards.Second is I was not able to make this thing flush with the other computer I needed to use it on. The card is so tall in the wrong place and butts up against parts on my motherboard, no matter what slot I put it in. Same issue with the SFF as my other case has both types of slots. Thanks to the unique design of my second case, I was able to find a place for it in the full size slot, but not where I needed it to be, and I still sort of had to force it as the bracket has this little lip on it that was causing issues with hitting the plastic of my case, but that may be a problem specific to my case.So while they are working great, someone really messed up on the SFF brackets. I just do not know how they did not realize this.
David Holland
Reviewed in the United States on April 26, 2024
Had to use judicious application of a Dremel cut off wheel to trim the bottom slot cover screw hole (wouldn't go down far enough, the motherboard was in the way) and notch the back half to get it to fit (the PCIe slot connector was in the way.)I suppose I should have returned it, but I didn't really want to delay my build further.(Caveat Emptor - It doesn't fit well, in a low profile/2U case.)
RandyL
Reviewed in the United States on April 17, 2024
Works great for my LTO tape drives
Recommended Products