Your cart is empty.
Your cart is empty.Product Description
Junior
Reviewed in the United States on January 14, 2025
This item is so easy to install and it’s pretty good
300cPilot
Reviewed in the United States on September 25, 2024
I contacted the seller and no response. This came with only a single fuse. Picture shows two. Discription is not clear that you get only one. Don't buy. Also fuse holder is a custom length so buying fuses locally is not possible.
Jeremy Haan
Reviewed in Canada on September 18, 2024
No idea if the box is good or not, but those crimps are absolute garbage. I've tried numerous different gauges, crimpers, and techniques, and the slightest pull removes the wire from the crimp, a fire waiting to happen. Will return
Eric
Reviewed in the United States on May 20, 2024
I liked how it was customizable. Materials feel durable. The bottom is open, intended to be installed on a flat surface. I have a 3d printer, so I am designing a bottom and mounting solution for my application. I inquired about replacement terminals. I know some of the other buyers had the same question. Here is the response I got from the vender.May 19, 2024 10:12 PM"Hello,Sorry, we do not sell the parts individually, but I have found two item for you on Amazon.As for relay terminals, you can directly search "B01MFEDLM4" on Amazon.But as for fuse terminals, we cannot find a totally same appearance terminals, maybe you can have a look at "B087Q8FMYN", it looks not such familar with our terminals, we are also not sure if it will work, but it has two "wings" at two sides, which is only one model I can find on Amazon.Sorry for any inconvenience this may bring to you.Best regards,DaierTek Team"I did not verify the compatibility of the terminals they suggested.
Kevin M.
Reviewed in the United States on May 14, 2024
I have uses these on several projects. They are well built, customizable, have lots of options and are large enough the do alot, but small enough to tuck away. The terminals it comes with seem to be ok. I wish there was a HD brass or copper terminal option. I have mounted the majority of them laying flat. Where fuses and relays mount straight down. Only 1 I have mounted on edge (vertically) where it's possible the terminals could loosen up and relays or fuses vibrate or fall out. So far so good. The threaded lugs are an M5 course thread. I run a 50 to 70amp breaker protected battery + cable to one set and chain off of it to diffrent circuits. Another lug will be batt -. The 3rd I'll make a keyed power pulling via a constant duty solenoid triggered by the key switch. Have had one unit arrive with a damaged box and lid. Item was replaced promptly. This unit is NOT sealed. This unit is NOT water proof. Mount unit in cab or area water will not get it. Unit is flat mount. Terminals can accommodate 12 gauge wire if your careful crimping them. But terminals like 14 gauge better.
Customer
Reviewed in Canada on October 31, 2024
tres bien
Buddy Faulk
Reviewed in the United States on April 3, 2024
This is a great fuse and relay enclosure for underhood or in cabin. However it’s not 100% waterproof, no rubber seals
Lynn R. Stevens
Reviewed in the United States on July 1, 2023
I needed extra terminals I never get it right the first time. Still trying to match fuse terminal for exact fit. Used for rat rod built from scratch. If I can get more terminals , and a little more room for wires. I will rate it a 5
Luke Cash
Reviewed in the United States on May 7, 2023
Needed a "pin it yourself" fuse and relay box for a standalone ecu install. Tried a different box first, but the quality of the terminals was junk, and it didnt have enough fuses for what i needed. This box is great by itself. The terminals are good quality and have a really positive lock on the receptacles. All the locking tabs are easy to disengage if you need to change something. Biggest plus on this box is the modular design. You can swap any group of 3 fuses with any relay, turn them sideways, etc.. The original layout was way too big for the amount of circuits I needed for the ecu and the space that was available, so I 3d printed different frames that hold the amount of relays and fuses that I need in different locations. Definitely recommend this if you need to build a custom setup. Ill buy another one of these to rob parts from anytime I need a custom configuration!
Alex Kennedy
Reviewed in Canada on May 10, 2023
I needed to create a custom fuse box for a work project, so I got this one because of its modular pieces. It was easy enough to model in CAD so I could 3D print my own enclosure and snap fit the modular parts into it. Worked like a charm. Overall, its a little pricey but work paid for it.. Don't know why it wanted me to rate its waterproofness. It's deff not waterproof.
Old and Stiff
Reviewed in Canada on April 1, 2023
If you are in need of a fuse and relay holder .. then this is the best product out there !The quality of the material is extremely robust and durable. The way it mounts is extremely solid. And the top-cover is very secure, and stll easy to remove.And this relay/fuse holder is attractive enough to be a show-piece, as I'd never hide this one !On the under-side are 7 super-solid brass distribution nodes, that you can use for your power distribution and for your grounds. Those brass power distribution nodes are a key feature for all your wire management, as you know .. a lot goes-on under there. They are the best solution ever ! for use with ring terminals.Each individual relay holder can be removed, rotated, relocated, and reorganized to suit your layout needs, whether you do a line or checkerboard layout .. this holder has you covered.Another great feature is all the spade and fuse holder crimps/tangs/lugs however you say them are supplied.Which gives you the freedom to use anywhere from 30 to 10 AWG wire In your project. Which is perfect for both power and your trigger wires.The fuse holders hold the ATC/ATO regular sized fuses.One of the best features is that you can reconfigure the fuse and relay-holder layout into any pattern you wish, as each 15 holders can be moved. And each individual fuse and relay holder can be rotated in any direction as well. Also, each Relay holder can hold all and any 1,2,3 4 and 5-pin relay, and any combination of pin orientation. Which is perfect for all Flasher relays as well.About the size .... it's amazingly compact, as I've seen bigger phones, and you can really fill this unit up, as it holds 10 Relays and 15 fuses.I can almost hide the entire unitunder one hand !And there is plenty of room for all your wires as well.There is even enough real-estate around the top perimeter for some switches to be mounted, as I used them for disabling the incoming power, and disabling the terminal 85 grounds.And this Seller is amazing !!!My lid was damaged in shipping, and they responded the same day,and express-shipped a entire replacement the next day. I am impressed to say the least. So-far .. this is my third unit. And I will buy more.My personal tip: I Install a relay/fuse holder in both the front and rear of every car, and use a negative trigger configuration.This methodology can reduce the gauge of wire in the entire middle of your car/boat/plane/buggy/dash, and give you a nicer finished vehicle.If you are here reading this review ... you've found the best, most universal, solid, durable, compact, attractive fuse/relay holder out there for sale !Cheers !
Ronald S.
Reviewed in the United States on December 16, 2022
This fuse/relay block is awesome. Very well made. Takes a lot of work to wire everything up, but totally worth it. I soldered every connection. This is not weather/water proof at all, but it's perfect for my needs.
Recommended Products