Shopping Cart

Your cart is empty.

Your cart is empty.

DaierTek 400 Amp ANL Fuse Holder Kit M10 Stud Terminals Max 750A for Car Truck Boat

Free shipping on orders over $29.99

$24.59

$ 11 .99 $11.99

In Stock

1.Color:500a


About this item

  • The nylon fuse base and polycarbonate cover have high temperature resistance and good insulation performance, which can effectively isolate current and prevent dangerous situations such as short circuits from occurring. And the nut with washer design aims to make the fuse and wire lugs fully contact with the fuse block, making it safer during high current use.
  • This ANL fuse block will come with a suitable 400A ANL fuse, which is gold plated design, with a transparent window to identify its status easier and quicker.
  • The fuse holder usually has a plug-in design, making it very convenient to install and replace fuses. What's more,it can be compatible with various sizes of ANL fuses.And the accompanying screws could securely fix it in place.
  • This ANL fuse holder is designed with a large capacity and could be capable of max 750A current, which means you can put whatever size fuses on it, such as 50A, 100A, 200A, 300A, 400A, 500A etc.
  • This large capacity ANL fuse holder can work well under the systems whose amperage don't exceed 750A, suitable for automotive, car, truck, boat, etc.



Product Description

400 amp anl fuse 400 amp anl fuse block 400 amp anl fuse holder 400 amp fuse
400 amp anl fuse 400 amp anl fuse holder 400 amp fuse anl fuse block anl fuse holder

Fuse Holder

Bus bar design large capacity ANL fuse holder block, separately fuse terminals and wire terminals, enables larger wire connection and higher amperage use, from 20A, 30A, 50A, 100A, to 200A, 300A, 500A, and max 750A current use.

400 amp anl fuse 400 amp anl fuse holder 400 amp fuse anl fuse block anl fuse holder

400A ANL Fuse

A 400 amp ANL fuse will come with this fuse block, which is gold plated design and has a transparent window on it to make it easy to identify the status, helps you easily distinguish which part need to be replaced when fuse blows.

400 amp anl fuse 400 amp anl fuse block 400 amp anl fuse holder 400 amp fuse 400a anl fuse
  • This fuse holder is an ANL fuse holder, suitable for ANL fuse, you can refer to the second image for detail dimensions of fuse.

  • The outer terminals are M10 studs and the center two terminals for ANL fuse are M8 studs, you can choose according to your needs.

  • The fuse holder is about 18cm length, and due to its cover design, you can vertically install the wires, and as for more dimensions, you can refer to the second image.

  • It requests M5 screws to mount the fuse holder, but don`t worry, each our fuse holder will come with two mounting screws for you, helps you to save energy to find suitable mounting screws.

  • Yes, the holder is capable of max 750A current, which means you can put whatever size fuses on it, such as 50A, 100A, 200A, 300A, etc, as long as do not exceed 750A.


KCisco
Reviewed in Canada on February 15, 2025
Bought this fuse holder for an inverter system install in my little RV. I liked the Amperage rating and lack of full cover for connection of stacked large guage eye connectors. I made my cable from 1/0 wire and doubled them for a 4/0 equivalent due to a good deal I found on the 1/0 wire. I don't plan on using the full amperage capacity of my inverter or wires but went with some over-capacity for safety and electrical efficiency. This fuse holder allowed me to stack the connectors and then cover the simply sits on the top of the posts, but doesn't limit the direction the wires or connectors can go. The unit appears well made, fits the standard fuses I also bought on Amazon, and worked well in the inverter install all last camping season. I recommend both this item and the seller based on my experience.
D Spratt
Reviewed in the United States on September 7, 2024
Tried breaker it over heated.
Nicholas Matis
Reviewed in the United States on July 21, 2024
When you have it in your hand you know it will take a lot of current. I have 4/0 lugs and welding wire.
Lonny
Reviewed in the United States on May 13, 2024
Very well built.im using it in my car audio build like I said very good quality ANL fuse holder I've been in car audio since the 90s and this is the best built quality fuse holder I've ever seen period...
Customer
Reviewed in the United States on December 25, 2024
El fusible llegó tal y como se solicitó. Ya estamos instalando lo para probar su eficiencia. Este fusible lo pedimos para un sistema electrico para una van camper. El fusible es muy apropiado y trabajo excelente.
Bakersbound
Reviewed in the United States on November 11, 2024
Man this thing is for sure hefty and built solid! I got this in line with my 3000 watt inverter and it holds up great without tripping. I also got some 500 and 600 fuses to go with it.
chris landry
Reviewed in Canada on November 11, 2024
Fait la jon rapport qualite prix imbattable
Scott
Reviewed in the United States on April 30, 2024
This is a nice high quality item
sylvain ferland
Reviewed in Canada on May 11, 2023
Bon prix bonne qualité j’aurai préféré pas de fusible pas la bonne capacité rien à faire avec celle là
Jason Kemp
Reviewed in Canada on February 16, 2023
I’ve used many over the years but this Fuse holder is by far the most robust and solid built.. Will easily support the use of the larger gauge wires like 2/0 Awg or even 3/0Awg.. Highly recommend especially for people using in larger Inverter..
Louis Na Val
Reviewed in the United States on December 4, 2023
I bought 3 different brands and this is the one I stayed with, it has actually worked I had a piece of equipment in my system fail and surge massive voltage I watched my 4/0 wire jump..... then pop the fuse blew, 2 minutes later I put the spare it came within and back to working.
Christopher R.
Reviewed in the United States on December 22, 2023
I have learned that lower amp anl fuses generate heat at the holder. Higher amp fuses allow more current and the unit stays cooler.Running 250amps with a 300amp fuse was getting HOT! Put in the 600amp fuse and it's much cooler. This is with copper welding cables and hydraulic crimps.So 4 stars for working when the former JBL literally melted apart. But it doesn't feel like I have the circuit fused having to run a fuse so far beyond the cables ratings..
Recommended Products

$10.99

$ 4 .99 $4.99

4.9
Select Option

$5.99

$ 1 .99 $1.99

4.4
Select Option

$12.99

$ 5 .99 $5.99

4.6
Select Option