Your cart is empty.
Your cart is empty. Package include:
1x Relay Receiver
2x Transmitters (contain battery)
1x Product manual
Parameter:
-Receiver Working voltage: DC 8V~80V
-Quiescent Current: -Max current: 30A
-RF frequency: 433MHz
-Working temperature: -30~+80
-Receiving Sensitivity: >97dbm
-Amount of storage remote controls: 20 pieces
-Support encoding: 1527 Leaning code
-RF Operating mode: ASK superheterodyne wireless reception
-Receiving range: Open space is more than 50 meters
-Waterproof grade: IP65
-Pin: N/L
- Operating mode: Momentary /Toggle/ Latched Mode
-Battery: 2x CR2016(contain)
Usage:
Momentary Mode:
1. Press and hold one button, relay “1” will turn on;
2. Release the button, this relay “1” will turn off.
Toggle Mode:
1. Press button “ON”, relay “1” will turn on;
2. Press button “ON” again, this relay “1” will turn off.
Latched mode:
1. Press button “ON”, relay “1” will turn on;
2. Press button “OFF”, relay “2” will turn on, at the same time relay “1” will turn off.
Reset:
Press the learning button (on the Receiver) 8 times. succeed.
Note:
After reset, all the remote controls cannot work any more.
Setup
1. Press the learning button (once for Momentary mode, twice for Toggle mode, triple for Latched mode). Wait for 3 seconds;
2. Press button “ON” . Wait for 3 seconds.
3. Press button “OFF” . Succeed.
Note: This item has already been set up in latched mode. "ON" button for turn on, and "OFF" button for turn off.